92 350 efi swap in an 84 pickup. questions

Jfoust · 04-12-2009, 09:57 AM

Ok i have been searching the forums for differents types of answers. But not having much luck finding it.

Ok I have an 84 toy 4x4 22r

I have laying around is an 92 350, with the wiring harrness and ecu.

I know of advanced adapters for the motor mounts and such. but im not wanting to use the stock drivetrain. but go with la80e trans and transfer case. obviously fabbed in with a cross member and what not.

1) But with the efi does anyone have any ideas for the fuel pump? and if i need to swap out the tank, which tank would work?

Or just and ideas and sugusstions would be great as well.

Thanks

Josh

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

89silverpu · 04-12-2009, 10:17 AM

Try Pirate4x4.com

Link to some engine swaps in yotas...

http://pirate4x4.com/forum/search.php?searchid=4533599

Adam F · 04-12-2009, 08:01 PM

The stock chevy pump should fit right in place of the stock Toyota pump. Or actually I think you can use the stock toyota pump.

86toylet · 04-13-2009, 06:50 AM

Upgrade your lines comming out of the tank and throw an inline High pressure pump. You can pick all this stuff up through summit racing. I would run a 3/8 high pressure line, and a 5/16 return line for the V8.

Jfoust · 04-13-2009, 07:05 PM

sweet thanks guys that helps a bunch on the fuel issue

04-12-2009, 10:17 AM	#2 (permalink)
89silverpu Registered User Join Date: Feb 2007 Location: Vacaville/Sierra Nevada Mountains, CA/ UNLV (Las Vegas), NV Posts: 1,689	Try Pirate4x4.com Link to some engine swaps in yotas... http://pirate4x4.com/forum/search.php?searchid=4533599 __________________ '89 Beater Jeep Eater in progress 4.88's, TRD e-locker, Dual Cases, 33's, Armored, Tread Lightly Mixchallenge.info

04-12-2009, 08:01 PM	#3 (permalink)
Adam F Registered User Join Date: May 2002 Location: Cincinnati Ohio Posts: 2,397	The stock chevy pump should fit right in place of the stock Toyota pump. Or actually I think you can use the stock toyota pump. __________________ 88 4Runner. 350 V8, R150 5-speed. SAS, 36" TSL's, elocker rear

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
350 motor swap mated to 4cyl tranny questions.	O.R.A	Domestic Swaps	1	12-08-2008 08:33 AM
efi swap questions	1stgen18	Pre 84 Trucks	3	07-18-2008 07:15 PM
Chevy 350 Swap Questions?	UNO_Student	Domestic Swaps	2	06-07-2008 01:08 PM
chevy 350 swap into and 89 toyota pickup	yotamaster1988	86-95 Trucks & 4Runners	24	05-28-2008 09:16 PM
Chevy 350 swap header questions	snakedogg	Engine Swaps	5	12-06-2007 03:13 AM

04-13-2009, 06:50 AM	#4 (permalink)
86toylet Banned 'cause I was 4runnerchevy also banned Join Date: Mar 2009 Location: Santa Cruz Mountains Posts: 196	Upgrade your lines comming out of the tank and throw an inline High pressure pump. You can pick all this stuff up through summit racing. I would run a 3/8 high pressure line, and a 5/16 return line for the V8.

04-13-2009, 07:05 PM	#5 (permalink)
Jfoust Registered User Join Date: Apr 2009 Posts: 2	sweet thanks guys that helps a bunch on the fuel issue