The 95 4runner 1UZ swap project begins
#81
Registered User
iTrader: (2)
Join Date: Oct 2009
Location: Centeral Willamette Valley Oregon
Posts: 1,044
Likes: 0
Received 5 Likes
on
5 Posts
I paid to have my harness built. For the most part they did ok. I ended up having to go back and fix quite a few things they got wrong.
I built everything else to make my swap possible.
The shop that did my wiring was Toyota only swaps here in Oregon.
If you get in a pinch you can call them, have a harness built and I would be happy to walk you thru the things I fixed and upgraded from the wiring they will built.
I built everything else to make my swap possible.
The shop that did my wiring was Toyota only swaps here in Oregon.
If you get in a pinch you can call them, have a harness built and I would be happy to walk you thru the things I fixed and upgraded from the wiring they will built.
#82
Registered User
iTrader: (2)
Join Date: Oct 2009
Location: Centeral Willamette Valley Oregon
Posts: 1,044
Likes: 0
Received 5 Likes
on
5 Posts
After having the harness built the first time I can see now I wish I had just done it myself.
Upon my next Toyota build that gets this engine, I will take care of wiring my self.
Upon my next Toyota build that gets this engine, I will take care of wiring my self.
#84
Registered User
Thread Starter
the budget just is not there anymore...Tweaked wants $550 if you are able to ship them a complete pair of harnesses..just not feasable for me. I have no choice but to educate myself the best I can and try to fig it out on my own. The rash of mis information, wrong pinouts aaannnd typos on toyotas wiring schematics have made for one hell of a challenge for a guy who had no understanding of 12v dc circuitry what so ever. well..I have studied more in the last month than in my entire life combined and I think I have a decent grasp on how to wire it now. I am gonna make a few changes this morning and see if I am on the right path...
#85
Registered User
Thread Starter
does anyone know what you hook IH1 pin 14 B-R wire to? It went to the 3.0 injectors, coil and ignitor from ign key IG2 position. I wired in the ingition main relay from the ls400 which caries the injects, coils and ignitors for the 1uz but it will not fire. I wonder if I can take out the ign relay...off to try that now and see what happens.
#86
Registered User
Thread Starter
Got it running and it sounds just like the stang did....threw all the notes from everyone elses builds away and did it how I thought..bam..Roar!
#89
Registered User
the budget just is not there anymore...Tweaked wants $550 if you are able to ship them a complete pair of harnesses..just not feasable for me. I have no choice but to educate myself the best I can and try to fig it out on my own. The rash of mis information, wrong pinouts aaannnd typos on toyotas wiring schematics have made for one hell of a challenge for a guy who had no understanding of 12v dc circuitry what so ever. well..I have studied more in the last month than in my entire life combined and I think I have a decent grasp on how to wire it now. I am gonna make a few changes this morning and see if I am on the right path...
http://www.toyotanation.com/forum/12...ml#post6565969
my build extended almost 3 months.. those guys are a joke man... seriously, don't even waste your time: heres my 1uz build in need of my harness.. I still haven't received it back yet..
https://www.yotatech.com/forums/f161...se-4x4-269037/
Last edited by tyes; 02-22-2014 at 08:14 PM.
#92
The wiring is easy.
have a look on my thread I have a diagram there that I stole from someone else. Works great and is very easy.
Last edited by 87-SR5; 05-07-2014 at 05:44 PM. Reason: Bad spelling
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM