3vze to 5mge swap with auto trans help
#1
Registered User
Thread Starter
Join Date: Oct 2011
Location: Arizona
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
3vze to 5mge swap with auto trans help
Ok so I am putting a 5mge in my 1991 4runner with an auto trans. I know there are better engine choices but this is what I am sticking with. My question is what flex plate and torque converter to use to have it work with my A340H auto trans I already have the correct bell housing? Anyone done this with a 22re/7mge auto and ran into any issues? Will the 5mge flex plate and TC hold up? Any help would be great!
#2
Registered User
When I had my 5M-GE manual in my 86 pickup I used the 5M flywheel and clutch with my W56 transmission and it worked flawlessly. I don't see why the 5M flex plate and torque converter would not give you the same results.
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
6
07-16-2015 06:20 AM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM