Flywheel ???

Eat_at_Joes · 11-03-2009, 12:35 PM

Right now im about to dive head deep into my swap and all my parts are starting to pile up.

I have a 04 taco 3.4 auto that im putting into my 93 pu with the 3.0 and r150 behind it.

i plan to stick with the manual and need to know if a 3.4clutch disk and cover will fit onto the 93 flywheel or if this will cause me problems.

I have the parts for the 3.4 but i didn't realize that the flywheels differed between auto and manual.

I know that the clutch disc on the 3.4 is meant for more strength but i dunno about the flywheel.

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

yodathespian87 · 11-03-2009, 01:11 PM

Yes it will work. I have a 93 4Runner 5spd. and I got the 2001 Tacoma clutch disk and cover on mine. I bought new while I was in there so I don't have to go back in there for awhile.

Eat_at_Joes · 11-03-2009, 01:30 PM

sweet

Toyota ROCKS!

RobD · 11-03-2009, 06:12 PM

http://www.andrewzook.com/content/view/22/37/

One of the better sites for general questions on the swap.

I used the 3.4 flywheel, clutch, and pilot bearing and the 3.0 throwout bearing. There are one or two guys on here who have used the 3.0 flywheel and clutch successfully.

And for reference, manual trannies have a flywheel, autos have a flex plate.

667.tech · 11-04-2009, 06:58 AM

Yep it will al fit just fine. You will prob have to go to toyota and get the flywheel bolts the ones from the 3.0 will be too long and the bolts from the 3.4 auto flexplate are to small. I ended up going to toyota and getting them. Here is the part number i used. 90105-10138 they cost me 2.31 each from the local dealer. 1sttoyotaparts.com gots em for 1.49 + shipping. n u will need 8.

Eat_at_Joes · 11-04-2009, 05:00 PM

Good to know guys.
I might start a build thread for the 3.4 swap but im not sure yet.
I do know that if i need any help this is the place to come!

Eat_at_Joes · 11-20-2009, 05:29 PM

So after 3 people told me that the 3.0 flywheel would work with the 3.4 clutch disk and cover, It didnt. The studs on the 3.0 fly didnt match. I might have been able to make it work but i didnt want to weakin the drivetrain. I ended up getting a used flywheel for the 3.4 and resurfacing the face. just wanted to let anyone trying to do the same thing i do know that it doesnt fit.

11-03-2009, 01:11 PM	#2 (permalink)
yodathespian87 Contributing Member Join Date: Apr 2008 Location: Colorado Springs, Colorado Posts: 468	Yes it will work. I have a 93 4Runner 5spd. and I got the 2001 Tacoma clutch disk and cover on mine. I bought new while I was in there so I don't have to go back in there for awhile. __________________ 86 Pickup 4x2, Manual (Sold) 87 Extra Cab Pickup 4x4, Manual (Sold) 93 4Runner 4x4, Manual, 3.4 Swap In progress 90 4Runner 4x4, Manual, Blown 3.0 (Stripping out for parts then to become a trail rig/camping/fun truck) 94 Lexus SC400, 1UZ, magnaflow exhaust, after market headlights, bought for parts for the swap into the 90 4Runner

11-03-2009, 01:30 PM	#3 (permalink)
Eat_at_Joes Registered User Join Date: Apr 2009 Location: Green River, Wyoming Posts: 16	sweet Toyota ROCKS! __________________ The 3.0 remaining days are limited. muwahahah.... 1993 Yoda p/u 5 spd Custom bumpers, kc lights, warn m8000 winch On the way; 3.4 swap, custom light bar, Toyota e-locker

11-03-2009, 06:12 PM	#4 (permalink)
RobD Registered User Join Date: Jun 2006 Location: Calgary, AB Posts: 1,727	http://www.andrewzook.com/content/view/22/37/ One of the better sites for general questions on the swap. I used the 3.4 flywheel, clutch, and pilot bearing and the 3.0 throwout bearing. There are one or two guys on here who have used the 3.0 flywheel and clutch successfully. And for reference, manual trannies have a flywheel, autos have a flex plate. __________________ 1991 4Runner, 3.4 5VZFE swap, OME shocks/springs, 33" BFG All Terrain T/A KOs, Pioneer head unit, Infinity speakers, XM Satellite radio Last edited by RobD; 11-03-2009 at 06:13 PM.

11-04-2009, 05:00 PM	#6 (permalink)
Eat_at_Joes Registered User Join Date: Apr 2009 Location: Green River, Wyoming Posts: 16	Good to know guys. I might start a build thread for the 3.4 swap but im not sure yet. I do know that if i need any help this is the place to come! __________________ The 3.0 remaining days are limited. muwahahah.... 1993 Yoda p/u 5 spd Custom bumpers, kc lights, warn m8000 winch On the way; 3.4 swap, custom light bar, Toyota e-locker

11-20-2009, 05:29 PM	#7 (permalink)
Eat_at_Joes Registered User Join Date: Apr 2009 Location: Green River, Wyoming Posts: 16	So after 3 people told me that the 3.0 flywheel would work with the 3.4 clutch disk and cover, It didnt. The studs on the 3.0 fly didnt match. I might have been able to make it work but i didnt want to weakin the drivetrain. I ended up getting a used flywheel for the 3.4 and resurfacing the face. just wanted to let anyone trying to do the same thing i do know that it doesnt fit. __________________ The 3.0 remaining days are limited. muwahahah.... 1993 Yoda p/u 5 spd Custom bumpers, kc lights, warn m8000 winch On the way; 3.4 swap, custom light bar, Toyota e-locker Last edited by Eat_at_Joes; 11-20-2009 at 05:31 PM.

11-04-2009, 06:58 AM	#5 (permalink)
667.tech Registered User Join Date: Jan 2008 Posts: 17	Yep it will al fit just fine. You will prob have to go to toyota and get the flywheel bolts the ones from the 3.0 will be too long and the bolts from the 3.4 auto flexplate are to small. I ended up going to toyota and getting them. Here is the part number i used. 90105-10138 they cost me 2.31 each from the local dealer. 1sttoyotaparts.com gots em for 1.49 + shipping. n u will need 8.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search