Please note that the email server is about 1 to 2 hours behind, so please do not create a second account while waiting for your registration letter to arrive
Welcome to Yotatech!
Welcome to Yotatech,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I am curntly puting a 3.4 out of a 04 taco with a auto harness and ecu into a 93 p/u 3.0 with a 5 spd.
I was looking at the engine today and relized that the trottle body doesnt have a place for the cc cable to go. i have the cc setup where its in the steering wheel. The setup on the 04 taco has the cc stalk on the column itself.
The only thing that i can think of is try and swap the systems on the truck but keep the cc buttons in place. (example 3.4 ecm and throttle body but with the 3.0 controls.)
If anyone has done this or have a way that they can think to make it work let me know. My biggest problem is that the 3.0 has 4 wires coming from the buttons while the 3.4 has only 3 wires. this one stumped me so thanks for the help.
This ad is not displayed to registered members. Register your free account today and become a member on Yotatech!
10-25-2009, 12:43 PM
i have the cc setup where its in the steering wheel. The setup on the 04 taco has the cc stalk on the column itself. 
so thanks for the help.
