cruise control question
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: Binghamton, NY
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
My swap is running strong, 10k miles and counting on my s/c setup with the a340h.
I'm having problems making my cruise work consistently. The cables I'm making are letting go, the original cable from 3.0 is way too long.
I've tried 4 cylinder cables, and they work but they are sketchy. It's there a solid easy to make a cable, or a good place that makes one that works?
My setup I'd from the 94, trans is auto, cruise actuator is on passenger side near charcoal canister.
How did you get yours working?
I'm having problems making my cruise work consistently. The cables I'm making are letting go, the original cable from 3.0 is way too long.
I've tried 4 cylinder cables, and they work but they are sketchy. It's there a solid easy to make a cable, or a good place that makes one that works?
My setup I'd from the 94, trans is auto, cruise actuator is on passenger side near charcoal canister.
How did you get yours working?
Thread
Thread Starter
Forum
Replies
Last Post
kirkrunner
86-95 Trucks & 4Runners
2
07-27-2015 07:59 PM
rushw
General Electrical & Lighting Related Topics
4
07-18-2015 01:46 PM
icentropy
86-95 Trucks & 4Runners
7
07-14-2015 10:23 AM