3.4 wiring hell

Hophead · 07-07-2008, 12:04 PM

Hello all, long time lurker half way through my 3.4swap - I blame you all for putting me up to this! Anyhoo I am at the stage where I am dealing with the wiring - I have downloaded everything I can find in terms of free FSM's for the vehicles I am dealing with( 1992 4runner/1999 Tacoma- both 5spds) - but still the info I have is not specific enough. The Toyota Info Site requires that you have an American billing and mailing address, I am unforntunately Canadian up in Vancouver. ANyone have the EWD's for a '92 4Runner & '99 Tacoma they could pass on? How did any of you Canadians get the info you needed? I am banging my head against the wall trying to figure this wiring out. Everything was going so well, and then bam - hit a brick wall!

Any help is appreciated.

Patrick

fillsrunner4 · 07-07-2008, 12:18 PM

Quote:

Originally Posted by Hophead

Hello all, long time lurker half way through my 3.4swap - I blame you all for putting me up to this! Anyhoo I am at the stage where I am dealing with the wiring - I have downloaded everything I can find in terms of free FSM's for the vehicles I am dealing with( 1992 4runner/1999 Tacoma- both 5spds) - but still the info I have is not specific enough. The Toyota Info Site requires that you have an American billing and mailing address, I am unforntunately Canadian up in Vancouver. ANyone have the EWD's for a '92 4Runner & '99 Tacoma they could pass on? How did any of you Canadians get the info you needed? I am banging my head against the wall trying to figure this wiring out. Everything was going so well, and then bam - hit a brick wall!

Any help is appreciated.

Patrick

Your welcome

Go to toyota and ask them to print them off for you. The one near me has done it many times for me

Hophead · 07-07-2008, 12:40 PM

I just called the local Toyota dealership - the parts fella looked up the FSM's and told me both the 92 and 99 were "obselete". I am going to head by this afternoon after work and see if someone in the service department can copy me some.

fillsrunner4 · 07-07-2008, 12:47 PM

They sould be able to pull them right up for you there on there comps. they have to be able to because they use them out on the floor to work on the cars and trucks

screamer76 · 07-07-2008, 12:56 PM

sent you a pm

hrdted · 07-07-2008, 06:14 PM

Wiring diagrams sent. Good luck.

Hophead · 07-07-2008, 08:12 PM

Thanks I just got in from a 12 hour day at work - I will check emails tonight. Yotatech rocks!

I can't wait to get this thing running!

07-07-2008, 12:04 PM	#1 (permalink)
Hophead Registered User Join Date: May 2007 Location: North Vancouver BC Posts: 40	3.4 wiring hell Hello all, long time lurker half way through my 3.4swap - I blame you all for putting me up to this! Anyhoo I am at the stage where I am dealing with the wiring - I have downloaded everything I can find in terms of free FSM's for the vehicles I am dealing with( 1992 4runner/1999 Tacoma- both 5spds) - but still the info I have is not specific enough. The Toyota Info Site requires that you have an American billing and mailing address, I am unforntunately Canadian up in Vancouver. ANyone have the EWD's for a '92 4Runner & '99 Tacoma they could pass on? How did any of you Canadians get the info you needed? I am banging my head against the wall trying to figure this wiring out. Everything was going so well, and then bam - hit a brick wall! Any help is appreciated. Patrick

07-07-2008, 12:47 PM	#4 (permalink)
fillsrunner4 Registered User Join Date: Jun 2004 Location: Sammamish, wa Posts: 2,363	They sould be able to pull them right up for you there on there comps. they have to be able to because they use them out on the floor to work on the cars and trucks __________________ 94' toyota 4runner (Many a change!) purchased bone stock, NOW... SAS, 37x14" Iroks, Rear Leafs, 5.29's , Air locked front, Welded rear, 4.3L, Chevy V6 , 5spd swapped, dual T/C's MC10R10, flatbelly with custom skids, sliders, and so much more. Might as well start reading this if ya want know more Fillsrunner4 3.4crawler Build Thread Fillsrunner4.3 crawler (Part Two) build thread

07-07-2008, 12:56 PM	#5 (permalink)
screamer76 Registered User Join Date: Nov 2007 Location: tucson,az Posts: 201	sent you a pm __________________ 1995 4runner 5spd 4wd 3.4 swap

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hell yes 8$	808derek	Pre 84 Trucks	10	11-16-2007 09:41 PM
what the hell	CyMoN	Off Topic Talk	6	04-13-2007 07:32 PM
hell ya	iGGz	Off Topic Talk	5	03-20-2005 05:36 PM
what in the hell?	FUGGRWE	Off Topic Talk	3	02-06-2004 06:48 PM

07-07-2008, 12:40 PM	#3 (permalink)
Hophead Registered User Join Date: May 2007 Location: North Vancouver BC Posts: 40	I just called the local Toyota dealership - the parts fella looked up the FSM's and told me both the 92 and 99 were "obselete". I am going to head by this afternoon after work and see if someone in the service department can copy me some.

07-07-2008, 06:14 PM	#6 (permalink)
hrdted Registered User Join Date: Feb 2008 Location: Hood River, Oregon Posts: 16	Wiring diagrams sent. Good luck.

07-07-2008, 08:12 PM	#7 (permalink)
Hophead Registered User Join Date: May 2007 Location: North Vancouver BC Posts: 40	Thanks I just got in from a 12 hour day at work - I will check emails tonight. Yotatech rocks! I can't wait to get this thing running!