4Bt Cummins Diesel swap
#2
Registered User
do the isuzu 3.9 4bd2t lighter and tachs out a 4k instead o 3k and doesnt clatter like the 4bt, also exhaust will be in same spot. or the cummins 3.3. om617 5 cyl outta merdcedes, or a suped up 1.9 vw or the 140 hp 2.0 vw common rail. 4bts are cool but in a runner too heavy and clatter like hell. i would go isuzu or merc.
if you google it there is alot of good stuff out there. check this out
http://www.isuzudieselswapper.com/
if you google it there is alot of good stuff out there. check this out
http://www.isuzudieselswapper.com/
#4
Registered User
Thread Starter
Join Date: Jun 2010
Location: Chesapeake
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
The reason i was going to do a 4BT was because i got a guy who already has one sittin on the side for me, i just need to come up with the rest of the money, and im either doing that, or I'm gonna do a solid axle swap, i just havent really made up my mind, but around me, solid axles are over rated, so thats what was making me lean more towards the Diesel swap
#5
Registered User
well if you swap the diesel your factory ifs is going to hate it, i would do both and sas with a lc axle to hold the weight. check out this link to see whats involved
http://forum.ih8mud.com/hardcore-cor...ickup-44s.html
http://forum.ih8mud.com/hardcore-cor...ickup-44s.html
#6
Registered User
Thread Starter
Join Date: Jun 2010
Location: Chesapeake
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
yeah, im about to get my hands on a set of blazer axles out of an 85 k blazer, locked front and rear, just waiting on the money situation, and the truck will be coming off the road untill i get everything right, appreciate the help
#7
Registered User
Chesapeake? as in Maryland?
My bro has a Disco I and he was looking at a 4bt swap until he found the Isuzu engine mentioned above. He hasn't done it yet,still researching and collecting parts. I think the 4BT is really tall also
My bro has a Disco I and he was looking at a 4bt swap until he found the Isuzu engine mentioned above. He hasn't done it yet,still researching and collecting parts. I think the 4BT is really tall also
Trending Topics
#8
Registered User
if you sas it and get the motor low enough you might be good with the height with an oil pan mod. your probably going to have toreplace tranny and tcase too. i would look for a late 80's to 95 ram with a cummins 5speed that was wrecked or rolled and pick it up for a few grand and youll have most of what you need for the swap.
#10
Registered User
Join Date: Sep 2008
Location: Colorado
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
If you haven't already learned about it, the 1KZ-TE engine is amazing and is a choice that was optional in your 4runner overseas basically everywhere but in the USA and Canada. It isn't cheap, but once finished it will be like a factory choice. Parts are someone hard to come by but not impossible by any means. Also if you haven't found this site www.toyotadiesel.com you should check it out! 4bt will rattle so bad your teeth will hurt and the front end will hate you, too, regardless of the SAS in my opinion. I like your truck!
#11
Registered User
Thread Starter
Join Date: Jun 2010
Location: Chesapeake
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Well whatever i do end up doing, i wanna do it up right so i dont ever have to mess around with it again, even if it takes a couple months to get it complete, and Thanks, appreciate it.
#12
all cummins engines clatter and they are just an all around better engine than any thing els your gonna find but thats just my opinoin i have been looking for one for years and hope one day to to put one in my 85 pickup
#13
hey guys you all sound like you now whats going on when it comes to swaping out for other engines . im trying to figure out how to hook up my 89 22re engine ecu to a 92 body that had a 3ltr auto . any thoughts or words of what i should do . thanks .
#14
Registered User
a 3cyl rare cummins beast 3bt that displaces 3.45 liters would be sweet. its half of a 6.7 with a ve pump. can be found in some trac hoes however youll have to get crafty with the pump to make it non industrial.
#15
Registered User
Join Date: Apr 2012
Location: NOR CAL
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
The reason i was going to do a 4BT was because i got a guy who already has one sittin on the side for me, i just need to come up with the rest of the money, and im either doing that, or I'm gonna do a solid axle swap, i just havent really made up my mind, but around me, solid axles are over rated, so thats what was making me lean more towards the Diesel swap
Thread
Thread Starter
Forum
Replies
Last Post