t100 problems

Matt3203 · 09-21-2009, 10:49 PM

ok so ill just start here, when i start the truck after its been sitting for a while i idles fine but as i start to drive in bounces as if i have in 5th goin 10mph and does it with every shift til i start gettin into higher rpms. i also hear some sort of grinding noise around 2.5k to 3k rpms in all gears. these problems stop once you get it warmed up.

Now the other problem is when driving for more then 10 minutes at 65mph on the highway, the engine heats up a good bit, not over-heating, just halfway on the gauge apposed to a little less then a 1/4 on the gauge. i also get a oil burning smell but only after driving highway speeds(60+miles per hour) for bout 10mins also, and then the oil light comes on when i come off the high and come to a stop.

One more problem, one the driver side of the engine bay i hear a little tap/tick noise and someone told me its probably a small header leak, but im worried its the valves goin bad.

if anyone can help me with any of these problem please do

thank you

oh and i have a 1994 t100 DX 3.0 5spd

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

toyota4x4907 · 09-21-2009, 11:17 PM

When was the last time you checked the oil level?..

Matt3203 · 09-21-2009, 11:26 PM

i checked it yesterday after noon and its was full

Zuke79 · 09-22-2009, 05:18 AM

Does the tap/tick relate to the engine rpms or is it coming from the body?

Matt3203 · 09-22-2009, 05:27 AM

Quote:

Originally Posted by Zuke79

Does the tap/tick relate to the engine rpms or is it coming from the body?

its increases with engine rpm

Matt3203 · 09-22-2009, 07:20 PM

anybody know what could be wrong??

BamZipPow · 09-23-2009, 09:28 AM

Could you shoot some video and post it?

Also, are you the original owner? If not, then the dipstick could be the wrong one. Shoot a picture of it and post it.

When was the last time you changed the oil? How much oil did you put in?

Grinding noise could be the throwout bearing. How many miles do you have on the truck?

Matt3203 · 09-23-2009, 04:50 PM

Quote:

Originally Posted by BamZipPow

Could you shoot some video and post it?

Also, are you the original owner? If not, then the dipstick could be the wrong one. Shoot a picture of it and post it.

When was the last time you changed the oil? How much oil did you put in?

Grinding noise could be the throwout bearing. How many miles do you have on the truck?

the truck has 197000 miles, i changed the oil probably 1500miles ago. ill try and get a video tomorrow thanks for your help

Matt3203 · 09-23-2009, 05:16 PM

ok so another great thing just happened, i was making a video of the engine and the engine just dies and it wont crank back up, i really hope i didnt just kill my engine

BamZipPow · 09-23-2009, 07:17 PM

You can git a 19mm socket with a long ratchet, put it on the crank and turn it clockwise. If doesn't turn easily....then you've probably got a frozen bearing or so...

Matt3203 · 09-24-2009, 04:32 AM

http://www.youtube.com/watch?v=nGenRkHtgf4

well i let it sit over night and it started up, maybe it was just the fuel system, i know i probably need to change out some stuff

BamZipPow · 09-24-2009, 07:16 AM

The tapping sounds like valves...also it sounds like yer low on oil?

Piccies of the engine bay with various looks at the left/right sides would be helpful. Also, measure the dipstick and put up a picture of the dipstick handle. I've already seen one T-100 with the wrong dipstick.

Since it didn't crank at all last night...that would say that yer starter wasn't engaging and turning the engine over. You might want to check those starter contacts.

Matt3203 · 09-24-2009, 10:22 AM

come to think of it, its really hard to get the dip stick back in, unless you put it in just perfect

Matt3203 · 09-24-2009, 10:31 AM

Matt3203 · 09-24-2009, 11:51 AM

does anyone know if its the right dipstick, cause if it aint i dont wanna drive it low on oil

BamZipPow · 09-25-2009, 07:25 PM

Is there a number on the stick? It would be located near the end...

According to ToyoDIY the number should be 15301-65030 and measures exactly 22" from tip to the base of the handle. I got my measurements my 1993 T-100 and confirmed the numbers and measurement.

The measurement yer showing on yer stick is about 1/4" too short...

BamZipPow · 09-25-2009, 07:34 PM

Could you shoot some vid with you driving it? Need to hear this grinding sound at speed/rpm.

BamZipPow · 09-25-2009, 08:27 PM

Just out of curiousity...how are those U-joints doing? When was the timing belt/tensioners changed last? Water pump changed as well?

Matt3203 · 09-25-2009, 10:44 PM

yeah ill try and take a decent video of the grinding noise, but its only there sometimes

and i dont really know bout the u-joints, or water pump as i just got it bout 2 months ago

but theres a sticker that says the timing belt was changed at 164000
and im at 196000

Matt3203 · 10-01-2009, 05:56 AM

the dipstick has that number on it
and i cant get a video of grinding noise because it stopped? i aint complaining

09-21-2009, 11:17 PM	#2 (permalink)
toyota4x4907 Registered User Join Date: Sep 2008 Location: Fairbanks, Alaska Posts: 2,334	When was the last time you checked the oil level?.. __________________ '95 4runner\|22re\|5spd\|130K miles\|ISR\| 2" BL\| 31x10.5 \| CompuStar Auto-start\| two 170mm LightForce\|anti-sway bars removed f/r\|Warn manual hubs\|ADD bypassed\|Diff breather extensions\|XLPerformance muffler '88 4runner\|22re\|5spd\|206K miles\|Sold '93 single cab\|22re\|5spd\|150K miles\|Sold\| Pro IFS

10-01-2009, 05:56 AM	#20 (permalink)
Matt3203 Registered User Join Date: Jul 2009 Location: Columbus GA Posts: 60	the dipstick has that number on it and i cant get a video of grinding noise because it stopped? i aint complaining __________________ 1994 Toyota T100 reg. cab, V6, 5spd, 4wd, 32x11.5 maxxis bighorns on cragar soft 8s

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-21-2009, 11:26 PM	#3 (permalink)
Matt3203 Registered User Join Date: Jul 2009 Location: Columbus GA Posts: 60	i checked it yesterday after noon and its was full

09-22-2009, 05:18 AM	#4 (permalink)
Zuke79 Registered User Join Date: Jun 2009 Location: MD/VA Posts: 26	Does the tap/tick relate to the engine rpms or is it coming from the body?

09-22-2009, 07:20 PM	#6 (permalink)
Matt3203 Registered User Join Date: Jul 2009 Location: Columbus GA Posts: 60	anybody know what could be wrong??

09-23-2009, 09:28 AM	#7 (permalink)
BamZipPow Registered User Join Date: Feb 2007 Posts: 129	Could you shoot some video and post it? Also, are you the original owner? If not, then the dipstick could be the wrong one. Shoot a picture of it and post it. When was the last time you changed the oil? How much oil did you put in? Grinding noise could be the throwout bearing. How many miles do you have on the truck?

09-23-2009, 05:16 PM	#9 (permalink)
Matt3203 Registered User Join Date: Jul 2009 Location: Columbus GA Posts: 60	ok so another great thing just happened, i was making a video of the engine and the engine just dies and it wont crank back up, i really hope i didnt just kill my engine

09-23-2009, 07:17 PM	#10 (permalink)
BamZipPow Registered User Join Date: Feb 2007 Posts: 129	You can git a 19mm socket with a long ratchet, put it on the crank and turn it clockwise. If doesn't turn easily....then you've probably got a frozen bearing or so...

09-24-2009, 07:16 AM	#12 (permalink)
BamZipPow Registered User Join Date: Feb 2007 Posts: 129	The tapping sounds like valves...also it sounds like yer low on oil? Piccies of the engine bay with various looks at the left/right sides would be helpful. Also, measure the dipstick and put up a picture of the dipstick handle. I've already seen one T-100 with the wrong dipstick. Since it didn't crank at all last night...that would say that yer starter wasn't engaging and turning the engine over. You might want to check those starter contacts.

09-24-2009, 10:22 AM	#13 (permalink)
Matt3203 Registered User Join Date: Jul 2009 Location: Columbus GA Posts: 60	come to think of it, its really hard to get the dip stick back in, unless you put it in just perfect

09-24-2009, 10:31 AM	#14 (permalink)
Matt3203 Registered User Join Date: Jul 2009 Location: Columbus GA Posts: 60

09-24-2009, 11:51 AM	#15 (permalink)
Matt3203 Registered User Join Date: Jul 2009 Location: Columbus GA Posts: 60	does anyone know if its the right dipstick, cause if it aint i dont wanna drive it low on oil

09-25-2009, 07:25 PM	#16 (permalink)
BamZipPow Registered User Join Date: Feb 2007 Posts: 129	Is there a number on the stick? It would be located near the end... According to ToyoDIY the number should be 15301-65030 and measures exactly 22" from tip to the base of the handle. I got my measurements my 1993 T-100 and confirmed the numbers and measurement. The measurement yer showing on yer stick is about 1/4" too short...

09-25-2009, 07:34 PM	#17 (permalink)
BamZipPow Registered User Join Date: Feb 2007 Posts: 129	Could you shoot some vid with you driving it? Need to hear this grinding sound at speed/rpm.

09-25-2009, 08:27 PM	#18 (permalink)
BamZipPow Registered User Join Date: Feb 2007 Posts: 129	Just out of curiousity...how are those U-joints doing? When was the timing belt/tensioners changed last? Water pump changed as well?

09-25-2009, 10:44 PM	#19 (permalink)
Matt3203 Registered User Join Date: Jul 2009 Location: Columbus GA Posts: 60	yeah ill try and take a decent video of the grinding noise, but its only there sometimes and i dont really know bout the u-joints, or water pump as i just got it bout 2 months ago but theres a sticker that says the timing belt was changed at 164000 and im at 196000