Birdbrain

So, When it comes to my 94's rear window control in the center console, i have to turn the key to the starter position (aka one click past the acc) to be able to roll the rear window up and down. My question is, has anyone just done something like wired it to a constant hot so you can always roll it up and down?

This ad is not displayed to registered members. Register your free account today and become a member on Yotatech!

4Crawler

Here is what I did in my 1st gen:
- http://www.4crawler.com/4x4/CheapTri...ow.shtml#Relay

Basically tied the key and console switches together so that either work with the key off.

__________________
1985 Toyota 4Runner SR-5, 22REC engine, dual t-cases, 4.88 gears, dual ARBs, 33x10.50 BFGs or 35x12.50 MTRs
r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad
Gettin'Off 4WD Club

85excab

i bypassed everything cause my 90 4runner has a 96 tacoma wiring harness in it.
the rear window motor has 2 wires, to go up, send one 12 volts and ground the other, and to go down reverse the wires. i used a pair of high amp 3 way toggle switches.
the rear window wires are on the center post, on the top posts are hot/ground, and on the bottom posts are ground/hot. no more crap to ever deal with again, and works great!

__________________
i drive by brail.

Rock Solid Motorsports

http://www.rocksolidmotorsports.net/

http://www.lunatic4x4.org/forums/forumdisplay.php?f=45