96 tacoma heating issues
02-02-2014, 05:29 PM
#1
Registered User
Thread Starter
Join Date: Feb 2014
Location: Oregon Coast
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
96 tacoma heating issues
So I bought a 96 Tacoma a few weeks ago and noticed that the heater wouldn't get hot, the blower works great tho, I started pulling the dash apart and noticed that the cable that is connected to the tempurature knob was disconnected at the other end of the cable not where it connects to the knob but the other end, anyone have any idea where that connects to?
02-04-2014, 01:14 AM
#2
Registered User
iTrader: (6)
Join Date: May 2011
Location: Broomfield, CO
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
More then likely the heater control valve, not sure on a taco. On my 96 4runner the cable from the heater control inside the truck runs all the way thru the firewall and to the valve. My valve sits in middle just above the engine mounted to the firewall has some hoses going in and out and a little arm for the cable to clip into.
02-04-2014, 08:11 AM
#3
Registered User
More then likely the heater control valve, not sure on a taco. On my 96 4runner the cable from the heater control inside the truck runs all the way thru the firewall and to the valve. My valve sits in middle just above the engine mounted to the firewall has some hoses going in and out and a little arm for the cable to clip into.
Thread
Thread Starter
Forum
Replies
Last Post
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM
