Idle screw way out/up?

helidriver · 09-05-2006, 02:05 PM

Just got an 87 4Runner and the idle screw is way out. I don't know how many more turns before it will pop out but does this mean anything? Idles fine at about 900 as of now the way it sits. But I've had 2 other 22RE's and the screw was always atleast below the lip of the recess? Anyone have any ideas if this is good/bad/ok? thanks.

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

^VooDoo^ · 09-07-2006, 08:45 PM

Throttlebody is dirty inside, But no matter how you clean it, Dont use solvent on the TPS.
Also check the rubber between the TB and the MAFM for holes/cracks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where is idle speed adjustment screw located?	jaysonbraid30	Newbie Tech Section	4	03-23-2007 09:57 PM
Idle Positioning Screw setting	Chapman88SR5	86-95 Trucks & 4Runners	5	03-20-2007 11:26 PM
Rough idle/Idler screw?	four.runner	95.5-2004 Tacomas & 96-2002 4Runners	10	03-09-2005 04:06 PM
Idle Screw 95 Taco	pat2724	95.5-2004 Tacomas & 96-2002 4Runners	6	12-23-2004 05:13 PM
Idle Mixture screw on '93' 4Runner???	HALMAN	95.5-2004 Tacomas & 96-2002 4Runners	3	06-12-2002 11:41 AM

09-07-2006, 08:45 PM	#2 (permalink)
^VooDoo^ Contributing Member Join Date: Mar 2006 Location: Alhambra CA. Posts: 395	Throttlebody is dirty inside, But no matter how you clean it, Dont use solvent on the TPS. Also check the rubber between the TB and the MAFM for holes/cracks