how many splines- rear axle
#1
Registered User
Thread Starter
Join Date: Jan 2010
Location: naples,fl
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
how many splines- rear axle
i have a 88 pickup 5 speed 4x4 22re. i'm putting a spool in the rear. this is only a mud truck (never sees the road). having a problem finding out how many splines are on the rear axles 27 or 30. the axle code is G292. any help would be helpful. thanks
#3
Registered User
All pre-'95 4-cylinder 4wd mini-trucks & 4Runners use the Toyota 8" 2-pinion differential rear (except turbo models). This is known as the "4cyl diff." This diff is by far the most common diff in older Toyotas. These are 27 spline axles.
'86-95 4cyl Turbo and V6* trucks and 4runners, and ALL '96+ 4Runners use the Toyota 8" 4-pinion differential in the rear. This diff is known as the "V6/Turbo diff." These are 30 splines.
'86-95 4cyl Turbo and V6* trucks and 4runners, and ALL '96+ 4Runners use the Toyota 8" 4-pinion differential in the rear. This diff is known as the "V6/Turbo diff." These are 30 splines.
The following users liked this post:
Juanito94 (01-03-2022)
#5
Registered User
I was under the impression that all rears were 30 spline. and the fronts were 27 spline. But i could be wrong
this is a 4cly spool that is 30 spline.
http://durasolid.com/differential-pa...0ulw-31-4.aspx
this is a 4cly spool that is 30 spline.
http://durasolid.com/differential-pa...0ulw-31-4.aspx
Last edited by rattlewagon; 07-03-2010 at 11:34 AM.
#6
Registered User
ok after looking at this, I have conflicting answers both on 4x4 wire:
http://www.4x4wire.com/toyota/faq/parts/
http://home.4x4wire.com/erik/diffs/
http://www.4x4wire.com/toyota/faq/parts/
http://home.4x4wire.com/erik/diffs/
Trending Topics
#9
Registered User
ok after looking at this, I have conflicting answers both on 4x4 wire:
http://www.4x4wire.com/toyota/faq/parts/
http://home.4x4wire.com/erik/diffs/
http://www.4x4wire.com/toyota/faq/parts/
http://home.4x4wire.com/erik/diffs/
The spline count on the first link is referring to axles.
The second link says 27 spline pinion and does not say anything about spines for the axles. Though, directly under it, it states the V6 diffs have 30 spline axles and 27 spline pinion.
The yukon spool states "Yukon Performance 1-11/16" deck steel spool for Toyota 8.0" truck with 30 spline axles" and the description is "Toyota 8" 4 Cylinder, Full Spool, 30 Spline"
The gear code or G292 confirmed, 8", 4.10, 2 pinion open.
Here's your spool.
http://www.alljeep.com/oscommerce/pr...ucts_id=174577
You've got 30 spline axles, dude.
#10
Registered User
all toy diffs take 30 spline axle shafts.
only front toy shafts neck DOWN to 27 spline for the birfield but the other end of the shaft isnt necked down and is 30 spline to slip into the toy third
only front toy shafts neck DOWN to 27 spline for the birfield but the other end of the shaft isnt necked down and is 30 spline to slip into the toy third
#12
That's a fact jack!(pardon the pun)
Uh-huh, like he says. (not that it really matters...but my 88 has the V6, axle code G292, and has a 4-pinion 8" with 4.10 gears...axle codes can be wrong...mine should be G294)
Not quite right. Close though!
Front & Rear Solid axle = 30 spline axleshafts for all 8" rear differentials. Front 8" axleshafts are 30 spline inner(differential end), 27 spline outer(birfield end), 30 spline stud(hub end)
Front IFS axle = 27 spline stubshafts/side gear shafts for all IFS 7.5" differentials
IFS CV halfshaft = 27 spline inner shaft(at the inner tripod and outer birfield-type joints), 26 spline stud(hub end)
Just went out to the shed to count the splines on my spares, got both kinds 7.5" IFS & 8" rears. Triple-checked and CONFIRMED!
Uh-huh, like he says. (not that it really matters...but my 88 has the V6, axle code G292, and has a 4-pinion 8" with 4.10 gears...axle codes can be wrong...mine should be G294)
Front & Rear Solid axle = 30 spline axleshafts for all 8" rear differentials. Front 8" axleshafts are 30 spline inner(differential end), 27 spline outer(birfield end), 30 spline stud(hub end)
Front IFS axle = 27 spline stubshafts/side gear shafts for all IFS 7.5" differentials
IFS CV halfshaft = 27 spline inner shaft(at the inner tripod and outer birfield-type joints), 26 spline stud(hub end)
Just went out to the shed to count the splines on my spares, got both kinds 7.5" IFS & 8" rears. Triple-checked and CONFIRMED!
Last edited by MudHippy; 01-13-2011 at 05:51 PM.
#14
Registered User
Nice clarification Mudhippy. IFS has been erased from my memory; did a hardwipe reset to 000's to try and rid my brain of IFS intel... it was corrupt and took up to much valuable brain storage space had to go after SAS hehe
:-p
:-p
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM