reset check engine light
08-27-2008, 12:22 PM
#1
Registered User
Thread Starter
Join Date: Aug 2008
Location: Massachusetts
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
reset check engine light
Aside from disconnecting the battery cables, does anybody know how to reset the check engine light in a 03 4runner V6?
08-27-2008, 12:34 PM
#2
Registered User
Join Date: Jul 2003
Location: Clarkston, WA
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
On my friends hundai this weekend I pulled the EFI fuse for a while and it reset the check engine light, I also disconected the battery...it worked though 
Don't know for sure if it works on our rigs or not though?
Don't know for sure if it works on our rigs or not though?
Last edited by Yota Runner; 08-27-2008 at 12:35 PM.
08-27-2008, 01:37 PM
#3
Registered User
Join Date: May 2008
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
disconnect both battery cables
then (while disconnected from batty) hold the positive cable end to the negative cable end and hold together for 30 seconds
this works on most newer rigs
then (while disconnected from batty) hold the positive cable end to the negative cable end and hold together for 30 seconds
this works on most newer rigs
09-07-2008, 06:26 AM
#4
Registered User
Join Date: Apr 2003
Location: A stone's throw from the Rose Parade
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Not all codes go away this way. You can buy a cheap code reader like from harborfreight.com which also clears codes. To bad the reader won't repair the problem too.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
