well though i had it but it still broke!!
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: milwaukee, WI baby muddin in the streets!!
Posts: 2,801
Likes: 0
Received 1 Like
on
1 Post
well though i had it but it still broke!!
well i though the new AFM fixed it i guess not still no power under 3k and it wont get out of its own way!!!!
got a newer AFM from a buddys truck
unpluged air/fuel gauge
checking tps
and nothing what the hell i dont get it!!!!
please help me out guys its really getting me mad i got out ran by a moped today from a red light grrrrrrrrrrr
got a newer AFM from a buddys truck
unpluged air/fuel gauge
checking tps
and nothing what the hell i dont get it!!!!
please help me out guys its really getting me mad i got out ran by a moped today from a red light grrrrrrrrrrr
Last edited by just a 22re; 10-13-2008 at 06:15 PM.
#3
Registered User
Join Date: Sep 2008
Location: new baltimore ny
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Does your truck run like that all the time? Id try unplugging the cold start injector and if that makes no difference, try unplugging the o2. It sounds like it may be running way to rich
#5
Registered User
Thread Starter
Join Date: Jan 2007
Location: milwaukee, WI baby muddin in the streets!!
Posts: 2,801
Likes: 0
Received 1 Like
on
1 Post
timing is good and it dont really do this everytime but most of the time about 99.9999% of the time but when it dont is just fine
ok just got done testing the tps and look what i found
vta-e2 closed 606
idl-e2 closed 605 1/16 about 1200 and 1/8 1955 anything after that its dead
vta-e2 wot dead nothing passed about 1/8
im thinking i need to replace this now lol but heres the kicker i can not pull any codes the light dont even blink unless engine is running i dont get it in the book it says that the tps has to be at full closed and then it will give the codes is this true?
oh and it idles a lil better with the tps plugged in not sure about driving it with it unplugged yet
ok just got done testing the tps and look what i found
vta-e2 closed 606
idl-e2 closed 605 1/16 about 1200 and 1/8 1955 anything after that its dead
vta-e2 wot dead nothing passed about 1/8
im thinking i need to replace this now lol but heres the kicker i can not pull any codes the light dont even blink unless engine is running i dont get it in the book it says that the tps has to be at full closed and then it will give the codes is this true?
oh and it idles a lil better with the tps plugged in not sure about driving it with it unplugged yet
Thread
Thread Starter
Forum
Replies
Last Post