trouble code 42....
#2
Registered User
Join Date: Sep 2008
Location: middle of no where Alaska
Posts: 4,355
Likes: 0
Received 2 Likes
on
2 Posts
42- Vehicle Speed Sensor Signal.-- SPD signal is not input to the ECM for at least 8 seconds during high load driving with engine speed between 2200rpm and 5000 rpm.. Trouble area- Open or short in vehicle speed sensor circuit. Vehicle speed sensor. ECM
#3
Registered User
Thread Starter
Join Date: Dec 2008
Location: NFM, Florida
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
i know my speedo doesn't work, but how would that make my truck misfire? 42 is the only code i pulled. do i have to clear that one to get the next one?
#6
Registered User
Thread Starter
Join Date: Dec 2008
Location: NFM, Florida
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
just checked it again, and all i got was 42 over and over.
my cel never stays on.
when it starts missing real bad the light will flash a couple times and go off. and if it misses and i floor it, the light will come on for about 5 seconds then go out.
why wouldn't it store the code?
my cel never stays on.
when it starts missing real bad the light will flash a couple times and go off. and if it misses and i floor it, the light will come on for about 5 seconds then go out.
why wouldn't it store the code?
Thread
Thread Starter
Forum
Replies
Last Post
some drunk guy
86-95 Trucks & 4Runners
23
08-03-2021 06:09 PM
Longbed 90
86-95 Trucks & 4Runners
22
03-11-2019 12:38 PM
Boomer8404
General Vehicle Related Topics (Non Year Related)
4
09-17-2015 07:59 AM