TPS settings/ problem
10-11-2008, 02:30 PM
#1
Registered User
Thread Starter
Join Date: Nov 2007
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
TPS settings/ problem
So my truck was having the Idle/brake surge problem so i tracked it down to being the TPS. Plopped a new one in it fixed it but now i cant get my idle down under 3k or it will do the same surging problem. any suggestions?
Edit: Its a 92 22re 4x4 pickup manual
Edit: Its a 92 22re 4x4 pickup manual
Last edited by Troph; 10-11-2008 at 02:43 PM.
10-12-2008, 09:33 AM
#3
Registered User
Join Date: Mar 2008
Location: Temecula Valley, CA
Posts: 12,723
Likes: 0
Received 4 Likes
on
4 Posts
as allan mentioned, you have to get the TPS adjusted properly with the throttle closed so that the ECU sees the signal from the TPS that the throttle is closed. If the ECU doesn't see that signal, it can cause the idle speed to hunt around.
since you said something about the brakes, you don't have a vacuum leak from the brake booster?
since you said something about the brakes, you don't have a vacuum leak from the brake booster?
Thread
Thread Starter
Forum
Replies
Last Post
