toyota body/chevy frame????
#1
toyota body/chevy frame????
so i find this guy selling 3/4 ton frames from chevys all sfa's $150 each
says one of them he was going to put a yota on it so he shortened the frame
my question is what can be gained from doing this ?????
should i jump on this deal?
says one of them he was going to put a yota on it so he shortened the frame
my question is what can be gained from doing this ?????
should i jump on this deal?
#5
Registered User
I see alot of work! If you want to dig into a job like this Why not just build yourself a buggy and go out and destroy the trails. I dont see any reason why to do this!
#6
Registered User
You get this... When done right.
https://www.yotatech.com/forums/f5/h...deluxe-125935/
See post #1,8,12
https://www.yotatech.com/forums/f5/h...deluxe-125935/
See post #1,8,12
#7
Registered User
Join Date: Aug 2008
Location: Huddleston, VA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
seen this done with cars and small trucks (funniest was an Escort, but they used an Mini truck frame). Simple reason why its done is the frame of one vehicle is broke,rusted, or bent beyond repair. While the Body of the other has been destroyed. Thats why its always Mid 70's to mid 80's Chevy frames because the body's were rusting away on the showroom floor.
Only real gains I see are the abilitly to run a Full Length Dana 60 or better (wider is better IMO) with a short frame (shorter is better IMO),and Easy to fit a SBC V8 in
Only real gains I see are the abilitly to run a Full Length Dana 60 or better (wider is better IMO) with a short frame (shorter is better IMO),and Easy to fit a SBC V8 in
Trending Topics
#10
Contributing Member
Join Date: Nov 2006
Location: Dickson,Tennessee
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
correct me if i am wrong but your also going to be dealing with a different Axel width. If you like the "tires sticking way out" look then i guess its fine.
#11
Registered User
the reason for this would be ifyou wanted to swap in a 454 big or 350 small or something along those lines you could just bolt everything up, chop the frame up a bit and throw your yota body on there plus your neighbors and passers by will know your hardcore if you have a yota frame sitting in your yard
#12
Registered User
this for instance is a chevy with a yota body
http://www.youtube.com/watch?v=kfQ9k8mXcEc
at that pointyour just driving a chevy that wishes it was a yota though
http://www.youtube.com/watch?v=kfQ9k8mXcEc
at that pointyour just driving a chevy that wishes it was a yota though
#13
Registered User
Join Date: Aug 2008
Location: Huddleston, VA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
this for instance is a chevy with a yota body
http://www.youtube.com/watch?v=kfQ9k8mXcEc
at that pointyour just driving a chevy that wishes it was a yota though
http://www.youtube.com/watch?v=kfQ9k8mXcEc
at that pointyour just driving a chevy that wishes it was a yota though
#14
Registered User
#15
Registered User
Join Date: Jun 2015
Location: Ridley, PA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Yes but how do you know which Chevy frame will fit on your Yota? I have a 91 and the frame is cracked on the front passenger side. 4" lift kit, spartan locker up front, 33x12.50" ProComp tires, new clutch..... What would you do?
Thread
Thread Starter
Forum
Replies
Last Post
MMA_Alex
86-95 Trucks & 4Runners (Build-Up Section)
25
04-18-2017 05:07 AM
steve miller
General Electrical & Lighting Related Topics
2
10-10-2015 01:40 AM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM