jamessears

Ok guy I lifted my truck awhile back with the new ball joint spacers then a few days ago I put a new rearend and leafs springs under the rear and now the back sits 3ft 6 1/2 in from ground to center of wheel well and the front sits 3 ft 2 1/2 in from ground to center of wheel well what can I do to lift the front to sit even with the back the torsion bar have already been cranked all the way up any ideas thanks in advance

EmeraldTrucky

Maybe remove the spacers in the rear (assuming there are spacers back there)? Some take to the stance doesn't hurt but not sure if 3 inches looks like too much.