Matt16

I have a 1990 4Runner SR5 22RE 5 spd. with power steering. I have even seen an ABS fuse. I'm thus assuming I have rear ABS even though I have never seen an ABS light on the dash.

Is the process different for bleeding FRONT brakes with a truck equipped with rear ABS?

Jay351

Rear abs makes no difference in how you bleed the brakes.

toytech76

**X2*

Matt16

Good, that makes life easy. Now to modify the load sensing proportioning valve to cope with the 1.5" lift.

Jay351

I didn't even bother

But if you really want to, just make a flat bracket 1.5" long and bolt the lsv to that and the bracket to the stock mounting hole on the axle.

longhungsilver

or just stick it to your frame like i did

Matt16

The braking is fine as is, I just have time because I'm off work from a car accident.

bigarms23

if you have abs look for the sensor on the3rd member if its not there you dont