Quick Brake fitting Question
02-01-2011, 11:02 AM
#1
Registered User
Thread Starter
Quick Brake fitting Question
I need a verification before I hit the crappy auto parts store in my town.
The truck should have 3/16" brake and clutch lines right?
With 10mmx1.0 thread double flare fittings right?
A quick reply would be handy.
I'm replacing from the MC to the union in the DS wheel well, MC to PS distribution block, and the 2 lines from the distribution block to the LSPV.
Also from the Clutch Master to the flex line.
And what size and fittings is the hard fuel line from the filter to the flex lin going in to the tank?
The truck should have 3/16" brake and clutch lines right?
With 10mmx1.0 thread double flare fittings right?
A quick reply would be handy.
I'm replacing from the MC to the union in the DS wheel well, MC to PS distribution block, and the 2 lines from the distribution block to the LSPV.
Also from the Clutch Master to the flex line.
And what size and fittings is the hard fuel line from the filter to the flex lin going in to the tank?
Last edited by fierohink; 02-01-2011 at 12:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM
icentropy
86-95 Trucks & 4Runners
7
07-14-2015 10:23 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
