Power to solenoid valve on carb
#1
Power to solenoid valve on carb
Recently replaced carb as it was giving me issues, found out that the solenoid valve wasn't opening or closing it was receiving 11.84 volts from computer.
I have direct wired it to the battery with a 10A fuse.
The truck idles and I am able to set the timing to 0.
Am I causing any harm by having constant power to the valve?
And lastly how come the valve controls the idleability of the truck. What I have read is it is for dieseling after turning the truck off.
Any assistance would be appreciated. Ben
I have direct wired it to the battery with a 10A fuse.
The truck idles and I am able to set the timing to 0.
Am I causing any harm by having constant power to the valve?
And lastly how come the valve controls the idleability of the truck. What I have read is it is for dieseling after turning the truck off.
Any assistance would be appreciated. Ben
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
mengquis
95.5-2004 Tacomas & 96-2002 4Runners
1
07-13-2015 10:39 AM