Post pics of 90-95 4Runner IFS lifted pics
#82
Registered User
Join Date: Jul 2009
Location: Tucson, Arizona
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Where do u guys think has the best ball joint spacers in terms of price. And also will the rear coils from a 99 landcruiser fit on my 91 4runner for a lift and will bj spacers even it out?
#85
Registered User
Thread Starter
James
#86
Registered User
93 4runner 4inch lift with 1inch spacers in the rear 35s warn winch and bumper lots of little stuff
next should be a 1uzfe swap then sas
DSC00262.jpg?t=1263506878
IMG_1099.jpg?t=1263506827
put on the bumper and winch
DSC00230.jpg?t=1263507127
IMG_9316.jpg?t=1263506783
IMG_9314.jpg?t=1263506760
IMG_9309.jpg?t=1263506734
lift installed
SL372831.jpg?t=1263506660
35s compared to stock
DSC00009.jpg?t=1263506621
added some goodies
IMG_3761.jpg?t=1263506550
when i first got it
next should be a 1uzfe swap then sas
DSC00262.jpg?t=1263506878
IMG_1099.jpg?t=1263506827
put on the bumper and winch
DSC00230.jpg?t=1263507127
IMG_9316.jpg?t=1263506783
IMG_9314.jpg?t=1263506760
IMG_9309.jpg?t=1263506734
lift installed
SL372831.jpg?t=1263506660
35s compared to stock
DSC00009.jpg?t=1263506621
added some goodies
IMG_3761.jpg?t=1263506550
when i first got it
Last edited by RoBatt; 01-14-2010 at 01:14 PM.
#88
Registered User
Join Date: Jul 2009
Location: Tucson, Arizona
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
TRDParts4u and other places sell them. Do a search. Also make sure when you decide to buy BJ spacers, make sure the company does not sell you a cast aluminum one. Most you find out there are machined billet aluminum and that is the ones you want. The LC coils will fit your 91 4Runner.
James
James
Thx
#92
Registered User
Join Date: May 2009
Location: Santa Fe, NM
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
93 4runner 3.0, the day i bought it.
Lc coils and ball joint spacers. sitting on 31/12.50r15.
saving up for 33x12.50s, 4.88', lockers for front and rear, and free wheeling hubs. hopefully in the next month or so.
Lc coils and ball joint spacers. sitting on 31/12.50r15.
saving up for 33x12.50s, 4.88', lockers for front and rear, and free wheeling hubs. hopefully in the next month or so.
#99
Registered User
Join Date: Feb 2008
Location: hendersonville, TN.
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
a really good way to get travel out of your IFS is a 1 inch diff spacer, 2" BJ spacer and upper control arms, sway bar disconnect.then adjust your torsion bars so the front rides the same hight as stock. it will ride like a caddy and flex like a caddy kit. used this setup on an 86 pickup and ran the parker 400 (389 miles) in just under 9 hours, averaged about 45mph. as for the coil rear, land cruiser coils sound good to me. I used custom 60" leafs.
Last edited by yotaman85; 03-16-2010 at 10:36 PM.
#100
Registered User
Join Date: Sep 2006
Location: Portland Oregon
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
So glad I can finally post in this thread! Just installed my BJ/Coil Spacer lift this last weekend.
Lift Included:
- 1.5" BJ spacer (no torsion bar crank)
- 2" Coil Spacer
- Panhard Drop Bracket
- Homemade LSPV bracket
- SkyJacker 8000 Nitro Shocks
Before:
After:
Lift Included:
- 1.5" BJ spacer (no torsion bar crank)
- 2" Coil Spacer
- Panhard Drop Bracket
- Homemade LSPV bracket
- SkyJacker 8000 Nitro Shocks
Before:
After:
Last edited by SigEp4Runner; 04-07-2010 at 06:54 PM.