JamesD

I just want to see 2nd gen 4Runners with IFS lifts. Does not matter if it is just a BJ spacer or a full bracket lift. Post them up!

94 w/4" Superlift on 35" 4.56 gears


James

olharleyman

OK here's my 90 with a Pro Comp 4" Stage II lift 35 x 12.5 M/T's 5.29's 5 speed 16 mpg



35 x 12.5 KO's

CRafferty

My T4R with 2" Spacer lift. She's waiting for LC coils and a regearing at the moment..

JamesD

Post them up! I know you guys are holding back!

camo31_10.50

ok jeez hold on..LOL

camo31_10.50

4in Trailmaster and some 33x12.50 BFG Muds also has factory 4.56 gears

what kind of gas mileage do you guys get with your 4in lifts and 35's (assuming you get as mileage..LMAO) and tell whether you got 4.56's.4.88's..5.29's and so on..

Zeb8806

95 4runner BJ spacers, LC coils and I think the previous owner cranked the T bars a little. 32x 11.50 cooper STTs

JamesD

How does it ride?

Zeb8806

Rides great not harsh in the least bit. Its a little more tippy now but Im running with no sway bars haha.

toyota4x4907

Does it have to have IFS lift or can it be IFS with a body lift ?

Tragic Drive

95 Runner, 33's, 4.56's, 2"RB body lift, Cruiser springs. Arbed locked rear,Marlin rear bumper and sliders,+ Some other goodies.

JeEVeS

1.5" BJ's and OME 900's. T bars eased up on. 34/9.50/15 TSL

Nashman00

here is mine trail gear rear and rancho/trail gear front one inc body lift

JamesD

That is the weirdest IFS lift I ever seen!

James

JamesD

Sure, I just want to separate the IFS lifts from the SAS. Many people are in the mindset that IFS is junk which is 100% not true even though I'm doing one to my 94 pickup The 4Runner is staying IFS and my other one is getting the SAS so I can have both.

James

Lumpy

Here is my lil project...LC Coils and the BJ Spacers will come sometime in the near future.
Wild Country 33x12.5 Factory 4.88's



She's got a bit of cancer but nothing that can't be dealt with.

JamesD

For now Lumpy, crank up the torsion bars but make sure you get lock out hubs first.

James

Lumpy

I don't know if I can...Gotta make more penetrating fluid and some PB Blaster. I don't know if I can get the adjusters to move without them snapping. Lotta rust down there.

JamesD

New ones from the dealer are not that expensive. I know all about rust. My other truck I had to sandblast them. I would not touch them until you get new bolts and nuts.

James

toyota4x4907

Stats in the sig

Before....


After someone hit me in a parking lot while I was parked.


My rig and my friends '96 Taco