djtroy

Trying to find the parts to add power steering to my 1992 Pickup. Has anyone else done this?

Rerunn

You need the gear box, crank pulley and pump bracket with the pump. I plan to do the same except run the psc kit

djtroy

Does anyone sell the parts as a kit or do you know how I could get everything I need. What about mounting bracket? Is getting all the stuff from a junk yard the only option?

Rerunn

More than likely junkyard is your best bet

Robert m

iTrader: (2)

Yes its possible. I did it on my truck last year. Took about 3-4 hours to get the old parts off and new parts installed and working. Buy new lines and hoses and make sure you use ATF for fluid and not power steering fluid.

djtroy

Do you have any tips on what year parts to get and was there anything that presented a challenge during install? What about the mounting braket?

Robert m

iTrader: (2)

AFAIK the pump, brackets, crank pulley, and reservoir should be the same for all 22re's. The box, hoses, cooler line, and steering shaft might be different for each generation but I dont know for sure.

I got my box, crank pulley, and steering shaft from the junkyard and then the brackets and cooler line from someone parting out a truck. I got new hoses, idler pulley, belt, and pump from the parts store and I am running a custom reservoir.