pitted 22r block
#1
pitted 22r block
Ok so about three weeks ago my timing chain ate through the timing chain cover on my 1987 22r. So i ordered new timing chain kit and decided replace the head gasket while i had it apart.
But after pulling the head and timing cover i decided to pull the engine and do a complete rebuild. After tearing everything apart i noticed cylinder 4 is pitted. So wanted to know should i hone it or have it bored
And please keep in mind im still in high school so money is tight, but any help is much appreciated.
thanks
But after pulling the head and timing cover i decided to pull the engine and do a complete rebuild. After tearing everything apart i noticed cylinder 4 is pitted. So wanted to know should i hone it or have it bored
And please keep in mind im still in high school so money is tight, but any help is much appreciated.
thanks
#5
ya it's just a little i can barley get my nails in it. All the other cylinders are like glass im just tryin to spend as little as possible. And one more question how can i tell if the bearings are shot. They don't look worn but the engine has almost 250k.
thanks alot guys.
thanks alot guys.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post