Patch Panels
#2
You might try this thread:
https://www.yotatech.com/forums/f116...rs-etc-221646/
https://www.yotatech.com/forums/f116...rs-etc-221646/
#4
Registered User
iTrader: (1)
you could try us
http://www.toyotafiberglass.com also has repair panels .. stamped steel replacements not hand formed like the other place .. We are also working on some NEW fiberglass replacements -- comming soon
.
http://www.toyotafiberglass.com also has repair panels .. stamped steel replacements not hand formed like the other place .. We are also working on some NEW fiberglass replacements -- comming soon
.
#5
Registered User
+1 for Slacker. Great guy, great products. I talked to him and wanted to buy his panel, but in my case I needed such a large piece that the shipping was super expensive. I got lucky to find that parts truck.
#6
Registered User
you could try us
http://www.toyotafiberglass.com also has repair panels .. stamped steel replacements not hand formed like the other place .. We are also working on some NEW fiberglass replacements -- comming soon
.
http://www.toyotafiberglass.com also has repair panels .. stamped steel replacements not hand formed like the other place .. We are also working on some NEW fiberglass replacements -- comming soon
.
I just checked your site and didn't see any listed. Next summer I'll be looking for cab corners for my '94, maybe rockers, too. What steel panels will you be offering? This would be a lot easier than forming my own, which is what I was planning to do.
Trending Topics
#8
Registered User
Try http://car-part.com for a place to cut some patch panels for you. There are lots of junkyards that don't belong to this site though. I'm with YotaRob though, the best bet is to cut your own at a pick-n-pull. Maybe you can ask for a cordless reciprocating saw and metal blades for Christmas!
#9
Registered User
iTrader: (1)
we only have the 95-95 4runner repair panels .. there very expencive , and we are actually phasing them out because of rising costs .. I kind of doubt we'll be doing any stamping because of high costs .. lets face it , most toyota truck people just dont want to pay for that quality . We are doing some fiberglass .. and maybe even some repair panels .
.
.
Last edited by slacker; 12-18-2010 at 03:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
1uzRunner
84-85 Trucks & 4Runners (Build-Up Section)
63
11-10-2018 03:58 PM
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
11-10-2015 06:54 AM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM
Buckaroo_Banzai
86-95 Trucks & 4Runners (Build-Up Section)
2
09-24-2015 07:26 AM