New type-r guitar!
#1
Banned
Thread Starter
Join Date: Feb 2007
Location: (Rednecks Inbreed In) Kansas
Posts: 1,349
Likes: 0
Received 1 Like
on
1 Post
New Type-R Exhaust!
Check out my new exhaust, I just put it on today, I think I gained like 15 horsepower cause I floored it on a dirt road in second with 33's and stock gears and spun the tires! Sounds wicked too!
http://s136.photobucket.com/albums/q...exhaust009.flv
Heres some pics, its really shiney, I had to cram it in there though..
Also if you notice I made a bumper outta 3/8" thick gas line I found at an abandon construction site, and used some steel and semi-gloss rattle cans and retrofitted it to my stock bumper mounts.. FYI I have a 3" body lift.. Its tougher'n crap.
http://s136.photobucket.com/albums/q...exhaust009.flv
Heres some pics, its really shiney, I had to cram it in there though..
Also if you notice I made a bumper outta 3/8" thick gas line I found at an abandon construction site, and used some steel and semi-gloss rattle cans and retrofitted it to my stock bumper mounts.. FYI I have a 3" body lift.. Its tougher'n crap.
Last edited by Trustyrusty; 01-31-2009 at 09:54 PM.
Trending Topics
#10
Contributing Member
Join Date: Aug 2008
Location: Indiana
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
You have got to be from Kentucky, being that you used some kentuckian chrome on that badass exhaust! Man what you really need now is a K&N exhast manifold....lol
Also you should use something a bit tougher than that tie down, maybe some hair ties? ohhh you could use some ZIP ties! Also the Type-R handwritten shows people that its COMPLETLY Custom! GREAT JOB yotabiff
But on a real note, gj on the bumper!
Also you should use something a bit tougher than that tie down, maybe some hair ties? ohhh you could use some ZIP ties! Also the Type-R handwritten shows people that its COMPLETLY Custom! GREAT JOB yotabiff
But on a real note, gj on the bumper!
#17
Banned
Thread Starter
Join Date: Feb 2007
Location: (Rednecks Inbreed In) Kansas
Posts: 1,349
Likes: 0
Received 1 Like
on
1 Post
Yeah right! HAHAH Take a look up close, it had no body line, and rust holes big enough to put your fists through on the passenger side.. I covered this:
With a gallon of bondo,fiberglass matting & resin, and about four cans worth of primer.. and its bubbling up again in 6 months..
But now people see me rollin by all murdered out and shizzle with my rumble pipe, I be gangsta son!
With a gallon of bondo,fiberglass matting & resin, and about four cans worth of primer.. and its bubbling up again in 6 months..
But now people see me rollin by all murdered out and shizzle with my rumble pipe, I be gangsta son!
#18
Banned
Thread Starter
Join Date: Feb 2007
Location: (Rednecks Inbreed In) Kansas
Posts: 1,349
Likes: 0
Received 1 Like
on
1 Post
Coat hangers are for trailerpark abortions Jay! I use only the HIGHEST of quality aftermarket performance bolt ons on this here beast. I just spent a total of 8 dollars a few months ago on a very luxurious "Color Place" Flat Black Paint Job, at the local body shop Cough walmart cough..