Need new G54 Transmission
#1
Registered User
Thread Starter
Join Date: Oct 2009
Location: Virginia Beach
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Need new G54 Transmission
Anyone got any good experience with transmission rebuilders? my old G54's taken a beating long enough, and it seems that limping it home after the fluid run-out on my leaky clutch master/slave cylinders was too much for it.
I replaced those, but my 1st gear is crunchy now, and reverse is next to impossible to get into unless I jam it. I have to force it into 1st or reverse pretty much.
I know next to nothing about transmissions aside from how to remove and install them and don't think I want to tackle this myself, so let me know if you know anything about rebuilders or have any other decent ideas.
right now I'm considering a Marlin unit, or maybe seeing if the guy at the machine shop I use can work some magic on it like he did on one for another vehicle I had.
I replaced those, but my 1st gear is crunchy now, and reverse is next to impossible to get into unless I jam it. I have to force it into 1st or reverse pretty much.
I know next to nothing about transmissions aside from how to remove and install them and don't think I want to tackle this myself, so let me know if you know anything about rebuilders or have any other decent ideas.
right now I'm considering a Marlin unit, or maybe seeing if the guy at the machine shop I use can work some magic on it like he did on one for another vehicle I had.
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
02-15-2020 06:55 AM
Odin
86-95 Trucks & 4Runners
3
09-26-2015 06:56 PM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM