My glasspack took a dump
11-17-2009, 03:11 PM
#1
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
My glasspack took a dump
My glasspack finally had enough!
Leaving the parking lot after dropping a few people off and my truck sounds alot louder, and seems to be vibrating my behind quite well!
Pull over and well there you go..
So, thinking of heading down to the local muffler shop and just getting them to slap in a peice of pipe in place and clamp it, so I can change it to a muffler down the road.
I knew it was going to happen soon, its a $20 flowtech that I put on almost 3 years ago. Didnt expect it to last too long.
Wierd part is it broke around the weld.. Clean break!
Leaving the parking lot after dropping a few people off and my truck sounds alot louder, and seems to be vibrating my behind quite well!
Pull over and well there you go..
So, thinking of heading down to the local muffler shop and just getting them to slap in a peice of pipe in place and clamp it, so I can change it to a muffler down the road.
I knew it was going to happen soon, its a $20 flowtech that I put on almost 3 years ago. Didnt expect it to last too long.
Wierd part is it broke around the weld.. Clean break!
11-17-2009, 10:11 PM
#4
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
yeah, but pipe is cheaper...and I was getting tired of the glasspack. If I dont like the straight pipe sound I will probibly throw a glasspack in there, or save up for a flowmaster 50 series.
11-18-2009, 10:27 AM
#7
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
I just want it to sound good!
I might cut off the remains of the glasspack myself and just go grab some pipe and slap it in. Im pretty broke right now so cheaper the better!
I might cut off the remains of the glasspack myself and just go grab some pipe and slap it in. Im pretty broke right now so cheaper the better!
Trending Topics
11-18-2009, 10:40 AM
#8
Registered User
Jay, dont think about it, just do it.
http://www.summitracing.com/parts/BOR-40981/
it will yeild you:
http://www.youtube.com/watch?v=pGZVVRyuQN0
http://www.summitracing.com/parts/BOR-40981/
it will yeild you:
http://www.youtube.com/watch?v=pGZVVRyuQN0
11-18-2009, 10:52 AM
#9
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
oh man, you suck!
Stop teasing me!
If I had a grand I would remove it all and put headers and that borla in there! It sounds too good for a 3.0!
Maybe I can do it once I get a new job, but that might be put on hold if I go back to school..
Stop teasing me!
If I had a grand I would remove it all and put headers and that borla in there! It sounds too good for a 3.0!
Maybe I can do it once I get a new job, but that might be put on hold if I go back to school..
11-18-2009, 11:03 AM
#10
Registered User
you could always just put the muffler on it? and piece it together one by one? I wonder what it would sound like with just a cat back with the turbo muffler.
11-18-2009, 12:01 PM
#11
Registered User
crapy deal man i have had problems with me exhaust forever, broken down pipe, leeks, new cat, hole new pipe out the back. i have a whole new exhaust exept the manifold lol. that stright pipe will be soo loud haha and everyone will love you lol. just grab a crapy glasspck from canadiantire for $30 haha.
Last edited by 91_TOYOTA_4x4; 11-18-2009 at 12:03 PM.
11-18-2009, 09:35 PM
#12
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
Its so loud right now! IT vibrates my truck haha!
On friday morning im going to my friends shop so I can cut off the remains of the glasspack. Gonna go to the muffler shop and have a peice of pipe cut and flared so I can just slip it on and clamp it.
Im so brok right now, it has to be the cheapest option. Should only cost me $20!
If I hate the way it sounds I will buy a glasspack, if I dont mind it I will run it till next year then save up for a borla, or possibly a flowy
On friday morning im going to my friends shop so I can cut off the remains of the glasspack. Gonna go to the muffler shop and have a peice of pipe cut and flared so I can just slip it on and clamp it.
Im so brok right now, it has to be the cheapest option. Should only cost me $20!
If I hate the way it sounds I will buy a glasspack, if I dont mind it I will run it till next year then save up for a borla, or possibly a flowy
11-19-2009, 01:14 PM
#13
Registered User
haha loud is good! i love it when there is some slow person driving and i blow past them and it sounds like a rig going by hehe. 22re at low rpm sounds rig ish lol. you should make a vid of your truck running that straight pipe 
oyah kinda of topic but how do you like the 3.0L with all the mods you have done? does it pull ok? i am so tired of my 22re on the street it just isnt fun to drive when you get passed by a honda civic on a hill hahaha i realy want a 3.4 extendee cab
oyah kinda of topic but how do you like the 3.0L with all the mods you have done? does it pull ok? i am so tired of my 22re on the street it just isnt fun to drive when you get passed by a honda civic on a hill hahaha i realy want a 3.4 extendee cab
11-20-2009, 02:23 PM
#15
Registered User
Join Date: Aug 2008
Location: Northern Colorado :-(
Posts: 1,758
Likes: 0
Received 2 Likes
on
2 Posts
haha loud is good! i love it when there is some slow person driving and i blow past them and it sounds like a rig going by hehe. 22re at low rpm sounds rig ish lol. you should make a vid of your truck running that straight pipe oyah kinda of topic but how do you like the 3.0L with all the mods you have done? does it pull ok? i am so tired of my 22re on the street it just isnt fun to drive when you get passed by a honda civic on a hill hahaha i realy want a 3.4 extendee cab
oyah kinda of topic but how do you like the 3.0L with all the mods you have done? does it pull ok? i am so tired of my 22re on the street it just isnt fun to drive when you get passed by a honda civic on a hill hahaha i realy want a 3.4 extendee cab
11-20-2009, 02:37 PM
#16
Registered User
well when i have flat ground and a tail wind lol. i wined it out to five grand and it gets going ok but it just sucks fuel up there haha. i have been thinking about selling my truck to because of how slow she is. i want a 3.4 swaped 2door runner or ext cab like jays only black aww yeah!
11-20-2009, 02:45 PM
#17
Registered User
Join Date: Aug 2008
Location: Northern Colorado :-(
Posts: 1,758
Likes: 0
Received 2 Likes
on
2 Posts
well when i have flat ground and a tail wind lol. i wined it out to five grand and it gets going ok but it just sucks fuel up there haha. i have been thinking about selling my truck to because of how slow she is. i want a 3.4 swaped 2door runner or ext cab like jays only black aww yeah!
11-20-2009, 02:48 PM
#18
Registered User
haha loud is good! i love it when there is some slow person driving and i blow past them and it sounds like a rig going by hehe. 22re at low rpm sounds rig ish lol. you should make a vid of your truck running that straight pipe oyah kinda of topic but how do you like the 3.0L with all the mods you have done? does it pull ok? i am so tired of my 22re on the street it just isnt fun to drive when you get passed by a honda civic on a hill hahaha i realy want a 3.4 extendee cab
oyah kinda of topic but how do you like the 3.0L with all the mods you have done? does it pull ok? i am so tired of my 22re on the street it just isnt fun to drive when you get passed by a honda civic on a hill hahaha i realy want a 3.4 extendee cab
11-20-2009, 03:02 PM
#19
Registered User
oyah i would swap out for a 3.4 in heart beat lol. i wouldn't mess around with the 3.0L but i was just wondering how jay liked his with the mods he has. and yah i wouldn't swap my brandnew 22re in for a crapy 3.0L lol no matter how slow my truck is
11-22-2009, 04:10 PM
#20
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
It pulls pretty hard for a 3.0! Pulls pretty decent to bout 5,800rpm then it kinda falls offs.
It'l run with a 3.4 if I shift good. That thing has mile long throws! Two miles of driveline doesnt help either.
right now my motor is running rich. A wire from the TPS to the ECU is bad so its causing the truck to read the truck is lean im assuming. No codes though...
I got a spare wiring harness, just dont have the time to pull the upper intake and pull the harness apart... Its been raining non stop! Im afraid I wont be able to do it till next year
Its been running like this for almost 3 years.. Im sure the rings are having a great time!
If I see ya, Il blow by you
Oh yeah, no update on the exhaust. My buddy left me hanging, so now the exhaust is left hanging I will post up when I fix it.
I wish I had my compresser at the house! I could have this thing done tomorrow.
It'l run with a 3.4 if I shift good. That thing has mile long throws! Two miles of driveline doesnt help either.
right now my motor is running rich. A wire from the TPS to the ECU is bad so its causing the truck to read the truck is lean im assuming. No codes though...
I got a spare wiring harness, just dont have the time to pull the upper intake and pull the harness apart... Its been raining non stop! Im afraid I wont be able to do it till next year
Its been running like this for almost 3 years.. Im sure the rings are having a great time!If I see ya, Il blow by you
Oh yeah, no update on the exhaust. My buddy left me hanging, so now the exhaust is left hanging
I will post up when I fix it.I wish I had my compresser at the house! I could have this thing done tomorrow.
