LCE finally admits their exhaust wil work with the 3vze
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Vancouver, British Columbia, Canada
Posts: 1,475
Likes: 0
Received 1 Like
on
1 Post
LCE finally admits their exhaust wil work with the 3vze
We now have another "official" exhaust option for the 3vze as far as a catback system. I sent an email to LCE the other day inquiring about their headers and I asked about their exhaust (for a friend) and they finally came clean, as well as updated their website, that their "pro flow" exhaust which is by far on paper the highest quality system avaible for the 3vze, will work with it, etc.
http://www.toyotacatalog.net/M1WebGe...9-CDB9FAB44EFE
This exhaust is 304 stainless steel and 2 1/4" mandrel bent which will get the most of your exhaust system, as well as this exhaust system will work extremely well for those who want to do 3.4 swaps and need an exhaust system of the appropriate size.
The pricetag on this exhaust ($389) considering the higher quality components (304 stainless steel), the muffler (magnaflow) & the noted installation attention to detail that LCE usually offers easily makes it a better option than the Jardone catback (alumiminized steel, and the Jardone muffler which is has mixed sound reviews and costs about $270ish if I'm not mistaken and doesn't have all the proper installation parts I'm told).
http://www.toyotacatalog.net/M1WebGe...9-CDB9FAB44EFE
This exhaust is 304 stainless steel and 2 1/4" mandrel bent which will get the most of your exhaust system, as well as this exhaust system will work extremely well for those who want to do 3.4 swaps and need an exhaust system of the appropriate size.
The pricetag on this exhaust ($389) considering the higher quality components (304 stainless steel), the muffler (magnaflow) & the noted installation attention to detail that LCE usually offers easily makes it a better option than the Jardone catback (alumiminized steel, and the Jardone muffler which is has mixed sound reviews and costs about $270ish if I'm not mistaken and doesn't have all the proper installation parts I'm told).
#3
Registered User
Thread Starter
Join Date: Apr 2004
Location: Vancouver, British Columbia, Canada
Posts: 1,475
Likes: 0
Received 1 Like
on
1 Post
Hey Jay - no pressure but just out of curiousity any idea on the ETA for when you're gonna come pick up your gear oils?
And I do think that that is a pretty good price when you factor in the quality of the components and the fact it's mandrel bent. Borla & other high quality catbacks that use the same types of components go for much more $$$ then that.
And I do think that that is a pretty good price when you factor in the quality of the components and the fact it's mandrel bent. Borla & other high quality catbacks that use the same types of components go for much more $$$ then that.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
07-06-2015 10:00 AM