gametom

so i was putting the intake back together and i don't remember where this was attached because when i took the intake off it was just hanging (the previous owner must have done some intake work) o it's a 91 4runner 22re 5speed





Thanks

8yota9

it gose down the side of the fender above the stering box ataches to the side of the intake box and the side of the wall.

DeathCougar

iTrader: (23)

Sorta....

It attaches to the middle of the intake at the top, and the pass side motor mount on the bottom.

The motor mount should have an open hole, hence the welded but on that intake support bracket.

gametom

is this where it attaches

DeathCougar

iTrader: (23)

yes. From there to the motor mount.

gametom

Sweet Thanks

4Hummer

Picture is worth a thosand words

DeathCougar

iTrader: (23)

I love that you have an oil COOLER mounted next to a block HEATER lol.

4Hummer

Figured it was the best place to put it. that way in the winter the Oil in the Filter will be a bit warmer on startup, along with the Coolant.

It gets to minus 30C here in the winter.

gametom

ya that's where i put it.
by the way i like the red 22re.
maybe i should make one ether blue or yellow.
what kinda paint did you use on the block?

Thanks for the help

4Hummer

Plain High Heat engine paint. Motomaster Brand (Canadian Tire)
Red and Grey.