Idle up valve
07-12-2009, 05:04 PM
#1
Registered User
Thread Starter
Join Date: Apr 2009
Location: Corona, Ca & Miami Fl
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Idle up valve
hi everyone... so i was wondering if anyone can point me in the right direction... so i need to figure out where the right connections to my idle up valve go on the intake manifold... i have been looking and looking but to no avail... so if anyone can post a pic or diagram... that would help soo much... and hopefully stop the gas comming out of my exhaust.
07-12-2009, 05:13 PM
#2
Contributing Member
what motor?
I am going to assume a 22re, only because that's all I'm familiar with, lol
gas coming out of your exuast?
well if that's what you're experiencing, I'd look at the cold start valve first; maybe it's sticking open
I rarely see actual gas coming out of the exhaust though; are you sure it's not just moister?
I am going to assume a 22re, only because that's all I'm familiar with, lol
gas coming out of your exuast?
well if that's what you're experiencing, I'd look at the cold start valve first; maybe it's sticking open
I rarely see actual gas coming out of the exhaust though; are you sure it's not just moister?
I would think
07-12-2009, 08:06 PM
#5
Registered User
Thread Starter
Join Date: Apr 2009
Location: Corona, Ca & Miami Fl
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
lol... its for the 3vze.... and i realized i put the fuel return line on to my egr line... my little nepew thought he would help by removing all the labels except one. lol... but i figured it all out. and thanks for the help... now on to the next problem lol...
Thread
Thread Starter
Forum
Replies
Last Post
Blamalam
86-95 Trucks & 4Runners
22
03-12-2022 07:34 AM
montanatruck
86-95 Trucks & 4Runners
15
02-26-2017 07:07 AM
sojourner567
86-95 Trucks & 4Runners
2
07-16-2015 08:52 PM
