how hard is it to bend an axle?
06-01-2014, 09:54 PM
#1
Registered User
Thread Starter
Join Date: Jun 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
how hard is it to bend an axle?
Hello new to this site and am hoping for some confirmation concerning the following:
85 Toyota long bed pickup 22re strait axle.
Lifted the front end to do a brake job.
Floor jack to center of axle no jack stands.
After work was complete truck has a shake in the front end 40 to 50 mph.
Is it possible to bend my axle lifting it that way?
P.S. my tires are not balanced but it didn't do this before the brake job.
The brakes have been installed properly.
Thank you in advance
Just realized that I posted in the wrong place could a mediator move this to 84 85 pickups and 4runners
85 Toyota long bed pickup 22re strait axle.
Lifted the front end to do a brake job.
Floor jack to center of axle no jack stands.
After work was complete truck has a shake in the front end 40 to 50 mph.
Is it possible to bend my axle lifting it that way?
P.S. my tires are not balanced but it didn't do this before the brake job.
The brakes have been installed properly.
Thank you in advance
Just realized that I posted in the wrong place could a mediator move this to 84 85 pickups and 4runners
Last edited by uenjoymyself; 06-01-2014 at 10:04 PM.
Thread
Thread Starter
Forum
Replies
Last Post
kirkrunner
86-95 Trucks & 4Runners
2
07-27-2015 07:59 PM
ripp96
95.5-2004 Tacomas & 96-2002 4Runners
0
07-25-2015 02:32 PM
Backcountry411
86-95 Trucks & 4Runners (Build-Up Section)
4
07-24-2015 08:06 AM
