Have to rev engine to get trans to shift
11-07-2010, 08:40 AM
#1
Registered User
Thread Starter
Join Date: Mar 2009
Location: Phoenix AZ
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Have to rev engine to get trans to shift
My autotrans wont shift until it hits about 4k in 2 - 4 gears. Started originally only in the shift to 4th but seems to have worked its way on down. It will also downshift around 3k. I cleared up for awhile after I really got on it, seemed to "clean it out" but now it is back. Could this be the solenoids? Valve Body?
What do you guys think?
What do you guys think?
11-07-2010, 10:07 AM
#3
Registered User
Thread Starter
Join Date: Mar 2009
Location: Phoenix AZ
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Fluid level was a little high, color not bad brown in color. Didn't smell bad either. I just took a little out and added some lucas trans additive in it to see how it would react. Drove around a little bit and no change, I will drive it to the office tomorrow and see what happens.
I did change the fluid earlier this year, I am guessing about 5,000 miles ago.
I did change the fluid earlier this year, I am guessing about 5,000 miles ago.
11-07-2010, 12:22 PM
#5
Registered User
Thread Starter
Join Date: Mar 2009
Location: Phoenix AZ
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
No it is off. I have been toggleing between on and off as well as OD on and off trying to get it to work. I even put it in 4 lo and tried to get it to break free. Nothing.
Thread
Thread Starter
Forum
Replies
Last Post
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 06:39 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
