Belize Off Road Team

I got Energy suspension low pro bump stops a few weeks ago and today i have time to install them. I removed on after days of WD40. Now when i go to loosen the nut on a bottom the whole bump stop turns.

What can i do to stop the bump stop from turning? i am willing to break the nut if i have to.

DeathCougar

iTrader: (23)

Grab onto the metal ring with a pair of vice grips.

Or torch the stupid thing out.

algranger

drill i hole in the side of the bump stop, stick a screw driver in there and startturning the nut

Belize Off Road Team

Excellent adivse, thank you guys! When my truck gets back from town i'll do that.

Cyberman

I can't remember how I got the old ones off anymore, but I think I got the rubber cut off, then used an angle grinder from underneath.

Belize Off Road Team

Yea i am just going to cut the bolts off because
1 it is to hard to get tools in to properly remove the stops and
2 it is just easier to cut then wrench.

dirtoyboy

I had to use a hacksaw to get mine off