boxmaker

I finally got around to getting the rear window working in my 86 4runner but the steel rail that the window sits in was rusted out completely and without thinking I threw the rail out... last June. I have the small rail that is attached right to the window but the larger rail/track that it all sits in is what i need.

Dimensions of this larger rail/track or where I could find a cheap replacement would be helpful. Their $150 from the dealer

Thanks,

boxmaker

tirogers

did you ever find a part # or a replacement? I need the same thing!

dropzone

iTrader: (6)

look in the FSM link in my sig...there is also a parts source sticky at the top of this folder

also moved your thread to the correct section

boxmaker

I didn't get a part number, but I'm going to try and find a rail / channel and then get a replacement made

slacker

iTrader: (1)

there are 2 different part #'s

69907E CHANNEL SUB-ASSY, BACK DOOR GLASS

69907-89101 RN61, VN61..(V, WG)..DLX QTY = 2
69907-89102 RN61, VN61..V, WG; W/*RW 1 QTY = 1


we have them avaliable here in Canada toyotafiberglass.com (not listed on the site though)
not sure why ocdropzone wont add us to his parts source? but we have lots of stuff


.