dashpot question
#1
Registered User
Thread Starter
Join Date: Aug 2008
Location: Northern Colorado :-(
Posts: 1,758
Likes: 0
Received 2 Likes
on
2 Posts
dashpot question
I noticed my dashpot on my 22re doesnt really do aything. The throttle pulley and stop thingy doesnt touch the button on the dashpot. Is it supposed to be this way?
Maybe a picture would help things. I'll get one tomorrow. The camera is at a football game right now.
Maybe a picture would help things. I'll get one tomorrow. The camera is at a football game right now.
#3
Registered User
Thread Starter
Join Date: Aug 2008
Location: Northern Colorado :-(
Posts: 1,758
Likes: 0
Received 2 Likes
on
2 Posts
do I need to test it if it doesnt even touch anything else? From the looks of it, it's just bolted onto the side of the throttle body. It's not connecting to anything else, so I'm guessing it's not serving its purpose.
#4
Contributing Member
iTrader: (3)
IIRC, the dashpot just provides a "cushion" to prevent immediate snapback of the butterfly valve inside the throttle body. If your isn't doing anything, you should try to clean it off or find another one from a junkyard. The little rod should ride against the linkage.
#6
Registered User
Join Date: Sep 2007
Location: San Francisco East Bay
Posts: 8,254
Likes: 0
Received 822 Likes
on
649 Posts
Mine is a '94, but I suspect that an '89 has a similar setup.
There are at least 5 different adjustments which will affect whether the throttle sits on the dashpot, and the chance that yours are all still correct after 20 years is not high.
First, if you have a "throttle lifter", then you need to check the dashpot at idle, not engine off (the throttle lifter opens the throttle a bit when vacuum is gone, to ease starting, and will lift it off the dash pot).
BigBluePile describes the operation correctly; that tiny delay makes a big difference on emissions when you jump off the throttle.
You can follow the FSM (I did) and reset all of the adjustments one by one (you will be checking the TPS in the process). But don't just "fiddle with it," do it systematically. Over the years, people working on your truck may have mis-adjusted one thing in order to compensate for something else that was mis-adjusted. If you correctly fix just one thing, it may stop running correctly until you fix the others too.
There are at least 5 different adjustments which will affect whether the throttle sits on the dashpot, and the chance that yours are all still correct after 20 years is not high.
First, if you have a "throttle lifter", then you need to check the dashpot at idle, not engine off (the throttle lifter opens the throttle a bit when vacuum is gone, to ease starting, and will lift it off the dash pot).
BigBluePile describes the operation correctly; that tiny delay makes a big difference on emissions when you jump off the throttle.
You can follow the FSM (I did) and reset all of the adjustments one by one (you will be checking the TPS in the process). But don't just "fiddle with it," do it systematically. Over the years, people working on your truck may have mis-adjusted one thing in order to compensate for something else that was mis-adjusted. If you correctly fix just one thing, it may stop running correctly until you fix the others too.
Thread
Thread Starter
Forum
Replies
Last Post
TJWilly
95.5-2004 Tacomas & 96-2002 4Runners
6
07-31-2015 02:05 PM