Custom Truck Bed Storage?
#1
Registered User
Thread Starter
Custom Truck Bed Storage?
Hey guys, I'm sick of my diamond plate tool box in the back of my truck. I don't like how it sits above the level of the truck bed and how I'm sacrificing storage space on either side of it, as well as underneath it. I'm thinking of building a custom storage box and wanted to see if you guys had built anything. Pics, description, advice?
Last edited by Monochrome; 01-16-2009 at 05:43 PM.
#5
Registered User
Join Date: Aug 2003
Location: Granite Falls, WA. U.S.A.
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
May not help ya for your purposes but my original plan for air compressor and second battery under the bed isn't looking so good, weather and water crossings the main factor. Now I am looking at that void space, and thinking (dangerous by itself) the battery I have, Optima Yellow top from a 94 Honda Civic might fit on one side and the air compressor on the other. Build some covers for the gaps, relocate the tie down points and previously wasted space= used space
#6
Registered User
Join Date: Aug 2008
Location: Northern Colorado :-(
Posts: 1,758
Likes: 0
Received 2 Likes
on
2 Posts
I dont use a toolbox or anything, I just use a giant ammo case I got at an army surplus store. Looks rugged and is very practical. On top of it I have my magnetic CB antenna.
There is some wasted space to the left and right of it, but it's easily removable if i ever need to haul anything in the back.
There is some wasted space to the left and right of it, but it's easily removable if i ever need to haul anything in the back.
#7
Registered User
Join Date: Jan 2008
Location: Nebraska/Kansas
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Do you have pictures of your bed tool box? I did quite a bit of searching and I found this one a few summers ago. I had three requirements: NO chrome, low profile, made in America. I feel it doesn't really sacrifice to much storage space except for the length of the bed.
Last edited by Camach; 01-18-2009 at 02:18 PM.
Trending Topics
#9
Registered User
Thread Starter
That is probably the best tool box I've seen. I still don't want one that sticks above the bed at all, though, and it needs to give me about two more inches of space between the cab and the wheel wells. I've got a Thule bike rack and I need 2" more to fit my bike in the bed without dropping the tailgate. So those are a few reasons why I think I want to build my own, and I can shape it exactly to the size of the bed.
Here's my current bed setup, which is crap. Next plans are to ditch the aluminum guards and toolbox, sand down the rust and spray protectant, install a drop-in bedliner (because the wheel wells and rails on the bottom of the bed are dented and beat beyond recognition), and build a custom box for myself. Not too ambitious.
By the way, where did you get your bedliner Camach? It's exactly like what I want, and it goes all the way up to the rails.
Here's my current bed setup, which is crap. Next plans are to ditch the aluminum guards and toolbox, sand down the rust and spray protectant, install a drop-in bedliner (because the wheel wells and rails on the bottom of the bed are dented and beat beyond recognition), and build a custom box for myself. Not too ambitious.
By the way, where did you get your bedliner Camach? It's exactly like what I want, and it goes all the way up to the rails.
#10
Registered User
Although I can't remember exactly who (might have been Matt16) but one of the guys on here with a 4runner built a storage unit that fit in the back of the runner very well.
Come to think of it there was another guy that built some storage for the back of his truck so he could haul all his gear and still use the bed area for sleeping in when he went camping. It was a neat little deck set up.
I just use a giant box that I slide out of the way when I need to haul something larger.
Come to think of it there was another guy that built some storage for the back of his truck so he could haul all his gear and still use the bed area for sleeping in when he went camping. It was a neat little deck set up.
I just use a giant box that I slide out of the way when I need to haul something larger.
#12
Registered User
I have some army surplus ammo cans that fit between the front of the box, and the wheel well. Bolt them down, and they make a half-decent place to store some things.
#13
Seems to me that the most efficient, and easiest way to make form fitting boxes would be to weld a piece of sheet from the wheel well to the tailgate, and then from there to the side of the bed. Then just make a lid somehow...Maybe I'll do this with my 4Runner since the bed is all torn up right now anyways.
#14
Registered User
Here we go.
http://www.bajataco.com/Camper1.html
This is what I had planned to do with mine, well sort of, and will probably go this route if I can ever afford a new truck.
http://www.bajataco.com/Camper1.html
This is what I had planned to do with mine, well sort of, and will probably go this route if I can ever afford a new truck.
#15
Registered User
that is nicely developed, and very workable...
but i like my empty bed for now..ive had to load it up a few times, luckily it stays empty.
if i were to sport a shell, that type of setup would be on my drafting board too.
good thing is you have a ton of options.
#16
Registered User
Saw this the other day while driving, thought aboot this thread so I snapped a pic. I doubt youll like it, cause i do think its ugly. But it is an idea.
#18
Registered User
IDK wtf it is exactly, pull out, pop up, idk..But it itsnt a work truck and there was a family in there. Um, Maybe they didnt want a durango...Cant blame them.. ....
#20
Registered User
Thread Starter
Thanks for the pic scuba, that's definitely insane. Not quite what I am going for, haha.
Squiddy, that is almost exactly like what I'm planning building. Except I want to make mine weatherproof (as much as is possible for a wood box), fit it perfectly next to my cab, and spray it with something like gravelguard. Then add special compartments, line with polyester carpet, etc. But I like that box.
Squiddy, that is almost exactly like what I'm planning building. Except I want to make mine weatherproof (as much as is possible for a wood box), fit it perfectly next to my cab, and spray it with something like gravelguard. Then add special compartments, line with polyester carpet, etc. But I like that box.