Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS
Sponsored by:
Sponsored by: DashLynx

Crap 22re,reman or rebuild

Thread Tools
 
Search this Thread
 
Old 02-06-2008, 12:36 AM
  #1  
Registered User
Thread Starter
 
erock's Avatar
 
Join Date: Jul 2006
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Crap 22re,reman or rebuild

Well you have all helped out alot in the past and I know it gets real annoying answering the same question over and over again so if you could just answer it one more time please..

So i'm in Oregon and once again in a years time I have to replace my motor from a blown head gasket,but this time I want to do it right instead of doing a backyard job even though I think we did a fine job. So yes the question would be where can I find a good remanufactured motor in this state im not looking to get one shipped so LC is out of the question and Jaspers is way to exspensive I found a guy in washington that would do it for around 2k but I have never heard of him posts on craigslist and has a website site http://www.mwautorepair.com/services.html sounds like a nice guy to me,I have also called a place that I beleive they use jonkat motor http://www.22re.com/jonkat/ they looked nice a little pricey but not as exspensive and I also found a link on this site to a place up in seattle http://www.rebuilt-auto-engines.com if somebody could help me out once again it would be much appreciated..I want to have it installed and stuff I dont want to do it myself at all..

Last edited by erock; 02-06-2008 at 12:47 AM.
Old 02-06-2008, 12:49 AM
  #2  
Contributing Member
 
Elton's Avatar
 
Join Date: Jul 2005
Location: Siletz,Oregon
Posts: 12,261
Likes: 0
Received 6 Likes on 5 Posts
give these guys a call ted know's his stuff http://www.engnbldr.com/ also there in oregon too
Old 02-06-2008, 12:53 AM
  #3  
Registered User
Thread Starter
 
erock's Avatar
 
Join Date: Jul 2006
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Thats where I purchased my cylinder head from I wasn't sure if the did full jobs though I can't tell from their website..
Old 02-06-2008, 06:26 AM
  #4  
Registered User
 
dcg9381's Avatar
 
Join Date: Jun 2006
Location: austin, tx
Posts: 1,825
Likes: 0
Received 1 Like on 1 Post
They do full jobs... They're reputation is best in the business.
Old 02-12-2008, 08:47 AM
  #5  
Registered User
Thread Starter
 
erock's Avatar
 
Join Date: Jul 2006
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Actually like I stated they don't do full jobs,I called and asked but apparently he has family that own Automotive shops and they do the full job so that where I will be taking it
Old 07-29-2008, 04:04 PM
  #6  
Registered User
 
aviatork's Avatar
 
Join Date: Jul 2008
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
MW auto repair

Originally Posted by erock
Well you have all helped out alot in the past and I know it gets real annoying answering the same question over and over again so if you could just answer it one more time please..

So i'm in Oregon and once again in a years time I have to replace my motor from a blown head gasket,but this time I want to do it right instead of doing a backyard job even though I think we did a fine job. So yes the question would be where can I find a good remanufactured motor in this state im not looking to get one shipped so LC is out of the question and Jaspers is way to exspensive I found a guy in washington that would do it for around 2k but I have never heard of him posts on craigslist and has a website site http://www.mwautorepair.com/services.html sounds like a nice guy to me,I have also called a place that I beleive they use jonkat motor http://www.22re.com/jonkat/ they looked nice a little pricey but not as exspensive and I also found a link on this site to a place up in seattle http://www.rebuilt-auto-engines.com if somebody could help me out once again it would be much appreciated..I want to have it installed and stuff I dont want to do it myself at all..
DO NOT USE MWAUTOREPAIR. The guy does not use toyota parts and does crappy work at best. He did'nt tighten the rear main bolt... leaked. My mechanic had to eat the cost of dropping the tranny to fix it. Then within 1000 miles the timing belt started to rattle against the cover. I asked for a new tensioner and chain and he sent me just the tensioner. (Not a toyota part) He then stated that the timing belt should be fine and he was not going to replace it. "and I don't use toyota parts" Even though he places a huge toyota logo on his website. Not sure about the rest of the toyota population, but if there is even a thought the chain is bad....YOU REPLACE IT!!!. I felt bad for my mechanic cause he took a hit on the labor while I took hit on the parts. If your smart, do not buy from this guy. Use someone who at least uses toyota parts in his blocks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Colington
86-95 Trucks & 4Runners
20
03-08-2020 09:51 AM
tobylab
General Vehicle Related Topics (Non Year Related)
6
01-18-2016 07:06 PM
coleypull15
86-95 Trucks & 4Runners
24
11-03-2015 07:41 AM
shisha1999
84-85 Trucks & 4Runners
12
09-21-2015 08:22 PM
tobylab
86-95 Trucks & 4Runners
0
07-12-2015 12:53 PM



Quick Reply: Crap 22re,reman or rebuild



All times are GMT -8. The time now is 04:16 PM.