cold start valve 3.0 v6
03-02-2013, 05:41 PM
#2
Registered User
Join Date: Sep 2007
Location: San Francisco East Bay
Posts: 8,252
Likes: 0
Received 820 Likes
on
648 Posts
Probably when it starts hanging out with the kids from the "other" side of the tracks.
If you're talking about a Toyota Pickup, you have a "Cold Start Injector" (CSI) and a "Cold Start Injector Time Switch." Plus a whole lot of other important parts to make your truck run. Do you have a specific question?
If the Injector fails closed it will be a little harder to start in cold weather. If it fails open (leaking) it may not be possible to start it, and if you can you may throw a "too rich" code. Of course, approximately 100 other things will cause either of those symptoms. So, if your truck is "hard to start," it could be the CSI or about 100 other things.
If you're talking about a Toyota Pickup, you have a "Cold Start Injector" (CSI) and a "Cold Start Injector Time Switch." Plus a whole lot of other important parts to make your truck run. Do you have a specific question?
If the Injector fails closed it will be a little harder to start in cold weather. If it fails open (leaking) it may not be possible to start it, and if you can you may throw a "too rich" code. Of course, approximately 100 other things will cause either of those symptoms. So, if your truck is "hard to start," it could be the CSI or about 100 other things.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Regency
General Electrical & Lighting Related Topics
20
01-03-2020 07:43 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
