Dakotaneu

for the past few months ive been debating if a chrome vinyl wrap on my 88 4runner would be worth it; and on the other hand, at the end of the last year my clutch went out, so when i had time at the begging of this year i replaced the clutch, fly wheel, pressure plate, pilot bearing, throw arm bearing, slave cylinder, and master cylinder. now after a month or so after the replacement my clutch is slipping and my clutch is really stiff on the play, i can just tap the peddle in a inch or so and it will engage. i tried adjusting the clutch peddle a few times, ive bleed the system 3 times and im running out of ideas on what the issues is. i really dont want to replace my clutch again. so does any one have any ideas on what the issue may be.

RAD4Runner

NOT if you have more critical issues to deal with.