Cam and valve suggestions for 3VZ
09-23-2013, 06:38 PM
#1
Registered User
Thread Starter
Cam and valve suggestions for 3VZ
Anybody have any stories about aftermarket cams. Have seen something about oversize valves for same engine. Manufactures of parts would be nice. Would like to change cam and going to have valves replaced so might have well have larger ones installed if available. Exhaust and throttle body too.
09-24-2013, 11:43 PM
#2
Registered User
Most folks on here used to recommend weasy but he's no longer active here adn I think stopped doing regrinds. I know DOA is selling some. Think they sell crower cams, which get mixed reviews but don't quote me. Colt cams get pretty good reviews on here too: http://www.coltcams.com/
To really get a benefit from cams you need to have your heads overbored and larger valves installed -- talk to engnbldr for heads and valves.
Once you run through the list and $, the 3.4 swap pays for itself...
To really get a benefit from cams you need to have your heads overbored and larger valves installed -- talk to engnbldr for heads and valves.
Once you run through the list and $, the 3.4 swap pays for itself...
Last edited by RSR; 09-24-2013 at 11:46 PM.
09-24-2013, 11:47 PM
#3
Registered User
These are good threads on cams:
https://www.yotatech.com/forums/f116...s-3vze-104685/
https://www.yotatech.com/forums/f116...s-3vze-108840/
Plenty of others too.
https://www.yotatech.com/forums/f116...s-3vze-104685/
https://www.yotatech.com/forums/f116...s-3vze-108840/
Plenty of others too.
Last edited by RSR; 09-24-2013 at 11:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Blamalam
86-95 Trucks & 4Runners
22
03-12-2022 07:34 AM
priest16
84-85 Trucks & 4Runners (Build-Up Section)
15
08-06-2015 07:43 AM
