Cam Degreeing Question '89 22re
#1
Registered User
Thread Starter
Join Date: Jul 2010
Location: Evergreen/Golden, CO
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Cam Degreeing Question '89 22re
I have a '89 22re will a Engnbldr Street RV head and 268c/Torkr cam.
I found positive TDC and proceeded to find the cam intake centerline. I used the this method (
) by LCE and this one (http://www.4x4wire.com/toyota/tech/cam_degreeing/).
Both ways I'm getting around 90deg. I should be at 110deg.
I didn't think I was doing it wrong so I started looking at pictures of what the cam looks like installed at I think I found my problem.
When the dowel pin is at 12o'clock, the peak of the No.1 intake lobe should be around 4o'clock (110deg centerline). My cam is at 10o'clock.
Does anyone tell me what their No.1 intake lobe looks like when at TDC? Thanks!
I found positive TDC and proceeded to find the cam intake centerline. I used the this method (
Both ways I'm getting around 90deg. I should be at 110deg.
I didn't think I was doing it wrong so I started looking at pictures of what the cam looks like installed at I think I found my problem.
When the dowel pin is at 12o'clock, the peak of the No.1 intake lobe should be around 4o'clock (110deg centerline). My cam is at 10o'clock.
Does anyone tell me what their No.1 intake lobe looks like when at TDC? Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
Jeffreynmandy
86-95 Trucks & 4Runners
21
07-18-2015 08:26 AM