cbr600rx7

So my 95 didn't come with a bumper. The old owner had crushed it past repair wheeling and had removed it. Of course he then crushed the rear corners so I guess he gets the smart guy award.

Any way I was able to track down a set of brackets today off a rusty bumper and found a clean rear bumper with no brackets for $50. I still need to figure out what thread bolts I need to mount the bumper to the frame of my truck and how exactly the brackets on the sides sit but I am excited to have a bumper back on.

dropzone

iTrader: (6)

i wanna say that the it is 12x1.25 or 10x1.25mm seems to be a finer pitch than 1.5

wyoming9

iTrader: (1)

12mmx1.25 not sure at the length

I would guess 40 to 50mm

cbr600rx7

Thanks for the info. I picked up some bolts today I will start cleaning up the old brackets today

cbr600rx7

The way I got her. I did the exhaust with out thinking of a stock bumper.

Salvaged mounts with cheap bumper

Getting there

About done. Still a little work left on the left side and I need to torque every thing down.

cbr600rx7

Needs a lot of adjustment and some cleaning but at least it's mounted.