Blown 3.0 what to do?
02-14-2011, 02:16 PM
#1
Registered User
Thread Starter
Join Date: Feb 2009
Location: Opelika,AL
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Blown 3.0 what to do?
Alright guys my mom acquired a 94 V6 2wd 4runner for some reason Im not quite sure
. I know it was knocking before she got it and it locked up the other day. Now Im tryin to weigh out the options of what to do to get this thing runnin. It has 233,000 on it so im thinkin I rebuild is gonna be a FULL rebuild to do it right. SO would a swap be better or tryin to find a good rebuilt 3.0. Im tryin to do what would be most cost effective but right. I know right "Good Luck with that" but any opinions are welcome!!!
. I know it was knocking before she got it and it locked up the other day. Now Im tryin to weigh out the options of what to do to get this thing runnin. It has 233,000 on it so im thinkin I rebuild is gonna be a FULL rebuild to do it right. SO would a swap be better or tryin to find a good rebuilt 3.0. Im tryin to do what would be most cost effective but right. I know right "Good Luck with that" but any opinions are welcome!!!
02-14-2011, 02:57 PM
#3
Registered User
Join Date: Dec 2010
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure what a used 3.0 goes for($500 or less?), but if you could find one and confirm that it is running as it should be (maybe it would still be mounted in another truck/4runner) and swap the motor then IMO that would have to be the most cost effective route. I know most of us don't have money falling out of our ears, so that would be my first attempt personally.
02-14-2011, 03:41 PM
#4
Contributing Member
Easiest would be to find a running 3.0, and swap it in. But a 3.4 is a better option than Rebuilding that POS. That motor is the biggest pain the butt I have ever worked on, and I only had to deal with the top end. Either put in another used one, or swap it. I wouldn't waste my time on a rebuild.
02-14-2011, 04:03 PM
#5
Registered User
This just happened to my buddy of mine, we ended up finding a engine with 180,000km for 500$ pulled.. so he got it and i did all the work.. if it locked up, chances are slim to rebuild it anyways..
btw, have fun... you'll be thankful for your 22re while working on the 3.slow
btw, have fun... you'll be thankful for your 22re while working on the 3.slow
02-14-2011, 07:29 PM
#7
Registered User
Join Date: Mar 2009
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
What I did but don't recommend is I puchased a reman motor with the upgraded headgaskets and spent 5000.00 then installed full ome lift all on a 2wd. Then 10k $ later a chick does an illegal in front of me and totals it. Now I'm trying to sell it after the insurance paid me out.
It's in the classifieds here
It's in the classifieds here
Trending Topics
02-14-2011, 07:33 PM
#8
Registered User
Join Date: Mar 2009
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
You would think there would be a whole buttload of people
Here in Cali looking for an amazing donor 2nd gen 4runner?? I think most of the yota enthusiasts are not in southern California. Here immigrants drive them cause they are cheap
Here in Cali looking for an amazing donor 2nd gen 4runner?? I think most of the yota enthusiasts are not in southern California. Here immigrants drive them cause they are cheap
02-15-2011, 09:30 AM
#11
Registered User
Thread Starter
Join Date: Feb 2009
Location: Opelika,AL
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Im pretty sure shes just tryin to get the thing runnin for my little brother as hes about to be 16 and all and needs a ride soon so SAS aint gonna happen lol
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: 1992 4Runner with 3.4 5speed $2000
sphealy
Vehicles - Trailers (Complete)
1
09-03-2015 07:55 PM
