another...3.0 Blown Headgasket! Whats worst case?
#1
Registered User
Thread Starter
another...3.0 Blown Headgasket! Whats worst case?
Hey guys, out of all the blown headgaskets that have been repaired, on this board, whats the worst case you have seen?
I have personally done about 8 headgasket jobs in the last year, and this 92 that Im doing right now, is the worst ive seen of them. Basically hydrolocked the motor, I pulled the heads off and found ALOT of water in Cyl's # 1,5 , 6. When I was disasembling the motor, found water in most of the vaccum lines and EGR, ...I didnt take any pics, But let me know what you have ran into.!
I have personally done about 8 headgasket jobs in the last year, and this 92 that Im doing right now, is the worst ive seen of them. Basically hydrolocked the motor, I pulled the heads off and found ALOT of water in Cyl's # 1,5 , 6. When I was disasembling the motor, found water in most of the vaccum lines and EGR, ...I didnt take any pics, But let me know what you have ran into.!
#2
Registered User
i had coolant all thru the intake. been tearing it down to see how bad it is.
with 241,xxx miles i don't know what i'll find when i get there.
since you have experience, what special tools are needed? got any pics of the tools?
with 241,xxx miles i don't know what i'll find when i get there.
since you have experience, what special tools are needed? got any pics of the tools?
Thread
Thread Starter
Forum
Replies
Last Post
_Nicco_
86-95 Trucks & 4Runners
35
09-21-2015 03:06 PM