millcitysboy606

Does anyone know what seats would be good to put inside my 88 pickup... I want to replace the stock bench seat that came in it.. its all worn out and REALLY!!! uncomfortable...

ozziesironmanoffroad

yeah, i dont like that bench either. that evil spring! AAAH! id say put sr5 4runner seats in it, its what i plan on doin

07sbock

Yea dude I have an 88 too, and that bench SUCKS!!!!!!!! So I went to the just yard and picked up some 95 4runner seats. The rear bolts lined up but I drilled new front bolts. They AWSOME!!!!!!! I paid 100 bucks for two.



not a good pick but thats what it looks like!

ozziesironmanoffroad

95 runner seats will work? wow.. i was under the impression that you had to stay within the year range

millcitysboy606

I was thinkinking the same about the year... guess I heading to the junk yard tommorow to look for some seats.. hope I'll find some good ones... If not Guess Ill give them a wash and throw a cover on them...

sirus62

i have an 87 and i went to my local dismantelers and got two 1992 2wd toyota seats for 100$... the rear bolts fine but the front needs holes drilled... they are great!

ozziesironmanoffroad

isnt there something about the holes already being predrilled from the factory?

PCE91V64x4

When you drill these holes is it any more complicated than just drilling and adding in bolts? Do you add any sort of brackets or reinforcements in the floor?

I may do this as well and am wondering what kind of process anyone has followed when doing this modification.

nate V

I have an 88 cab and I installed a pair of sr5 seats from a 4runner and they bolted right in. I Love them, very comfortable. I have also read somewhere that mr2 seats will bolt right in there too.

standardbyker88

i put 86 mr2s in my 92 2wd. front holes lined up. back got new holes. seatbelts arent an issue really, just rotated the tabs. added a 90s 4runner console and short shifter too.

runner4thebeat

I have no idea where you guys find all these parts and seats for your trucks. I've been looking for MONTHS now for the seats from an SR5 4Runner to replace my crappy seats and there are no parts for yotas here in SoCal..Any one know any dismantlers in SoCal?

millcitysboy606

I saw some celica and tercel seats i liked does anyone know if any of the two will fit good???

standardbyker88

try california minitruck dismantlers. or craigslist.

standardbyker88

look at the mounting style to the floor. trucks have a tab that bends over and verticle with a horizontal bolt that goes into a weld nut. back uses a flat horizontal tab with a verticle bolt hole to either a weld nut or a nut on the bottom. if you put a nut on the bottom, use a nice big flat washer just to be safe. i know mr2s use that mounting style, with about the same bolt pattern of the 4 corners. mine were tweaked so i just made new holes in a few spots. i also spaced the back up with a few nuts between the floor and brackets. i sent in a writeup for the swap. should be on here somewhere in the tech section.

ernest t bass

i used some camry seats.

however it took some serious fabrication by my mechanic.

1988camoyota

thanks guys for posting this i have been lookin for a different type seats because my bench seats aint comfortable and when u have a passenger it feels all cramped up!!!

87hillbillyoter

^ very useful reply to an old thread

1988camoyota

well excuse me for bein new to this whole forum thing

irab88

iTrader: (4)

hey guys,



all right then. welcome to yotatech.


(ps- we encourage searching and not bringing up old threads, but it's ok. i'm guilty of it, too)

1988camoyota

didnt know this. i was just lookin to see if i could find anything on seats for my '88