3rd gen Runner dash into a 1st gen
#1
Registered User
Thread Starter
3rd gen Runner dash into a 1st gen
Going to start pulling the dash out of a 97 runner and install it into my 1st gen Runner. All the electrical as well as well as the 3.4 motor swap.
Interested if you guys know of of any dash swaps in which someone may have done a write up on. Changing out the support beam, mounts, etc aren't a concern but the hvac system and ducting is.
Any links would be great.
Interested if you guys know of of any dash swaps in which someone may have done a write up on. Changing out the support beam, mounts, etc aren't a concern but the hvac system and ducting is.
Any links would be great.
#2
Registered User
Join Date: Nov 2014
Location: Pasco,wa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Going to start pulling the dash out of a 97 runner and install it into my 1st gen Runner. All the electrical as well as well as the 3.4 motor swap.
Interested if you guys know of of any dash swaps in which someone may have done a write up on. Changing out the support beam, mounts, etc aren't a concern but the hvac system and ducting is.
Any links would be great.
Interested if you guys know of of any dash swaps in which someone may have done a write up on. Changing out the support beam, mounts, etc aren't a concern but the hvac system and ducting is.
Any links would be great.
Last edited by Lembcke; 11-28-2014 at 10:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM