3.0L 3VZE rebuild. Need help finding parts
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Suffolk, VA.
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
3.0L 3VZE rebuild. Need help finding parts
I posted this in the Newbie Thread but I need my questions answered ASAP, Thanks
Ok heres the deal. I bought my 4Runner with a blown motor and purchased a junk yard motor to go into my 4runner. I decided to rebuild the junk yard motor because I didnt want to take any chances of it blowing up or breaking down. The motor I bought came out of a 2wd truck and I have a 4wd 4runner so the oil pans, windage trays, and oil pickup tubes are different between the two. The oil pan and the pickup tube off the blown 4wd motor are still good but the windage tray is beat to hell since 2 pistons and rods decided to go threw it.
Here are my parts questions. Where can I find a 4wd 3VZE windage tray? And where can I find a replacement knock sensor wire connector that goes from the knock sensor, between the intake manifold and cylinder head to the main engine wiring harness?
Thanks
Ok heres the deal. I bought my 4Runner with a blown motor and purchased a junk yard motor to go into my 4runner. I decided to rebuild the junk yard motor because I didnt want to take any chances of it blowing up or breaking down. The motor I bought came out of a 2wd truck and I have a 4wd 4runner so the oil pans, windage trays, and oil pickup tubes are different between the two. The oil pan and the pickup tube off the blown 4wd motor are still good but the windage tray is beat to hell since 2 pistons and rods decided to go threw it.
Here are my parts questions. Where can I find a 4wd 3VZE windage tray? And where can I find a replacement knock sensor wire connector that goes from the knock sensor, between the intake manifold and cylinder head to the main engine wiring harness?
Thanks
#2
Registered User
Join Date: Oct 2006
Location: Buffalo NY
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
i have a 1994 3vze engine with a blown head gasket, all other parts are functional. i was thinking about parting it out anyways. the engine has around 160,000 on it....plenty of life left. let me know if your interested
#3
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM